Request Quote
  1. Home
  2. Products
  3. Alloy Steel
  4. 4140 Alloy Steel Tubing

4140 Alloy Steel Tubing

AISI 4140 chromium-molybdenum alloy steel tubing to ASTM A519, hot-finished or cold-drawn, annealed or quenched and tempered, from Riyaarth Overseas.

4140 Alloy Steel Tubing by Riyaarth Overseas

4140 alloy steel tubing is seamless mechanical tubing made from AISI/SAE 4140, a medium-carbon chromium-molybdenum steel (UNS G41400). It is mainly ordered to ASTM A519, the specification for seamless carbon and alloy steel mechanical tubing. 4140 responds well to hardening, so the tube can be machined in the annealed state and then quenched and tempered to high strength, or bought already heat treated.

Because it combines strength, toughness and fatigue resistance, 4140 tubing is a common choice for hydraulic cylinders, drill collars, shafts, bushings and machined components in oilfield and heavy engineering work. Riyaarth Overseas supplies and exports 4140 alloy steel tubing in hot-finished and cold-drawn forms, with heat treatment and cut lengths arranged to suit machining shops and fabricators.

Key Features

Through-hardening: Chromium and molybdenum give 4140 good hardenability, so heavy walls reach uniform properties after quenching and tempering.

High strength and toughness: In the quenched and tempered condition 4140 offers much higher tensile strength than carbon steel tube while keeping useful impact toughness.

Machinability: Annealed tube machines readily for boring, threading and turning, and can be hardened afterwards or induction hardened locally.

Saves machining: Using seamless tube in place of solid bar for hollow parts reduces material waste and drilling time.

Specifications

ParameterDetails
StandardsASTM A519 (seamless mechanical tubing), AISI/SAE 4140
Grade / UNS4140 / UNS G41400
Outside diameter rangeHot-finished and cold-drawn sizes as per mill availability and enquiry
Wall thicknessLight to heavy wall, including thick-wall hollow tube
LengthRandom lengths and cut-to-length pieces
TypeSeamless, hot-finished (HF) or cold-drawn (CD)
Heat treatmentAnnealed, normalised, stress relieved, or quenched and tempered
EndsPlain, square cut
Form / finishRound tube; black, descaled or bright cold-drawn surface; honed ID on request
Test certificateEN 10204 3.1

When ordering, state the outside diameter, wall thickness or inside diameter, length and the heat treatment condition. For parts that will be bored and honed, it is usual to specify the finished inside diameter and let the tube be supplied with a machining allowance. For hydraulic cylinder work, cold-drawn tube gives a closer tolerance and better surface than hot-finished tube.

If the part will be quenched and tempered after machining, buy the tube annealed for easier cutting. If no further heat treatment is planned, order it quenched and tempered to the hardness range on your drawing, and ask for hardness results on the certificate.

Chemical Composition

ElementComposition (%)
Carbon (C)0.38 – 0.43
Manganese (Mn)0.75 – 1.00
Phosphorus (P)0.035 max
Sulphur (S)0.040 max
Silicon (Si)0.15 – 0.35
Chromium (Cr)0.80 – 1.10
Molybdenum (Mo)0.15 – 0.25

Mechanical Properties

PropertyValue (annealed, typical)
Tensile strength655 MPa
Yield strength415 MPa
Elongation25.7%
Hardness197 HB
Density7.85 g/cm³

ASTM A519 does not set fixed tensile minimums for alloy grades; properties depend on the heat treatment ordered. Quenched and tempered values are agreed with the buyer.

Equivalent Grades

Standard / systemDesignation
AISI / SAE4140
UNSG41400
EN 10083-342CrMo4 (1.7225)
BS 970708M40 (EN19 family)
JIS G4053SCM440

Testing and Inspection

Tubes are checked to ASTM A519 and to any additional requirements in the purchase order.

  • Chemical analysis by heat and product check
  • Hardness testing after the ordered heat treatment
  • Tensile testing where mechanical properties are specified
  • Ultrasonic testing for internal defects on request
  • Positive material identification (PMI)
  • Dimensional, straightness and surface inspection, with third-party inspection when required

Why Choose Riyaarth Overseas

Riyaarth Overseas supplies 4140 tubing from established tube mills and stockists, cut to the lengths your shop needs. We can arrange annealed or quenched and tempered material, provide EN 10204 3.1 certificates with heat numbers, and pack tubes securely for export. Send your sizes and condition and we will reply with a prompt quotation.

Applications

HydraulicsCylinder barrels, piston rods made from hollow stock and accumulator bodies.
Oil and gasDrill collars, subs, crossovers and downhole tool bodies that need strength and fatigue resistance.
Automotive and transportAxle tubes, steering parts and drive shafts in heavy vehicles.
Machine buildingSpindles, bushes, rollers and gear blanks machined from tube to save material.
Mining and earthmovingPins, bushings and wear-loaded hollow parts that are hardened after machining.
Defence and aerospace ground equipmentStructural and pressure-bearing hollow parts where a heat-treated Cr-Mo steel is specified.

Frequently asked questions

Which standard covers 4140 seamless tubing?

ASTM A519 covers seamless carbon and alloy steel mechanical tubing, including grade 4140.

Can 4140 tubing be supplied heat treated?

Yes. It can be supplied annealed for machining, normalised, stress relieved, or quenched and tempered to an agreed hardness or strength.

What is the European equivalent of 4140?

The closest European grade is 42CrMo4 (1.7225) to EN 10083-3. In Japan the equivalent is SCM440.

Is 4140 tubing used for pressure piping?

No. 4140 tubing is mechanical tubing for machined and structural parts. Pressure piping uses grades such as ASTM A335 or EN 10216-2.