Request Quote
  1. Home
  2. Products
  3. Inconel
  4. Inconel 690 Pipes & Tubes

Inconel 690 Pipes & Tubes

Inconel 690 (UNS N06690) pipes and tubes to ASTM B167 and B163 for nuclear steam generators and oxidising acid service, from Riyaarth Overseas.

Inconel 690 Pipes & Tubes by Riyaarth Overseas

Inconel 690 pipes and tubes are made from a high-chromium nickel alloy, UNS N06690 (Werkstoff 2.4642), with 27 – 31% chromium and 58% minimum nickel. The high chromium gives excellent resistance to oxidising acids, oxidising salts and high-temperature oxidising gases, and it greatly reduces the risk of stress corrosion cracking in high-temperature water.

Inconel 690 is best known as the steam generator tube material for pressurised water reactors, where it replaced Inconel 600. It is also used in nitric acid service and in high-temperature sulphur-bearing gases. Seamless pipe and tube are made to ASTM B167 and heat exchanger tubes to ASTM B163. Riyaarth Overseas supplies and exports Inconel 690 pipes and tubes from qualified mills with complete documentation.

Key Features

Stress corrosion cracking resistance: High chromium gives strong resistance to cracking in high-temperature water and steam, the main reason for its use in nuclear plants.

Oxidising acid resistance: The alloy resists nitric acid and nitric-hydrofluoric mixtures better than lower-chromium nickel alloys.

Oxidation and sulphidation: It forms a protective chromium oxide in hot gases, including those containing sulphur.

Low carbon: Carbon is limited to 0.05% max, reducing grain boundary carbide formation during welding and service.

Specifications

ParameterDetails
StandardsASTM B167 / ASME SB167 (seamless pipe and tube), ASTM B163 / SB163 (steam generator and heat exchanger tube)
Grade / UNSInconel 690 / UNS N06690
Outside diameter rangeSmall-bore tube to NPS pipe sizes, as per enquiry
Wall thickness / scheduleSCH 5S to SCH 160 or tube gauge
LengthRandom, fixed, cut lengths and U-bent tubes
TypeSeamless, cold-worked
ConditionAnnealed; thermally treated tube for nuclear service on order
EndsPlain end, bevelled end
Form / finishRound pipe and tube, bright annealed or pickled
Test certificateEN 10204 3.1 or 3.2

For nuclear steam generator tubing, Inconel 690 is ordered to ASTM B163 or ASME SB163 with supplementary requirements from the plant designer. These typically cover thermal treatment, grain size, cleanliness, tighter dimensional tolerances and full eddy current inspection. Industrial grade 690 tube for chemical service is ordered to the standard ASTM requirements.

Compared with Inconel 600, the higher chromium of 690 gives much better resistance to stress corrosion cracking in primary water and to oxidising acids, while keeping similar fabrication behaviour. It welds with matching high-chromium filler metals such as ERNiCrFe-7.

When sending an enquiry, include the standard, outside diameter, wall thickness, length or U-bend schedule and any supplementary requirements, so the correct mill route can be confirmed.

Chemical Composition

ElementComposition (%)
Nickel (Ni)58.0 min
Chromium (Cr)27.0 – 31.0
Iron (Fe)7.0 – 11.0
Carbon (C)0.05 max
Manganese (Mn)0.50 max
Silicon (Si)0.50 max
Sulphur (S)0.015 max
Copper (Cu)0.50 max

Mechanical Properties

Property (ASTM B167, cold-worked annealed)Value
Tensile strength, min586 MPa (85 ksi)
Yield strength (0.2%), min205 MPa (30 ksi)
Elongation, min35%
Density8.19 g/cm³
Melting range1343 – 1377 °C

Equivalent Grades

Standard / systemDesignation
UNSN06690
Werkstoff Nr.2.4642
EN / DINNiCr29Fe
Common namesAlloy 690

Testing and Inspection

Inconel 690 tubes for critical service are given more extensive testing than standard industrial material.

  • Chemical analysis and tensile testing
  • Eddy current testing of every tube
  • Ultrasonic testing where specified
  • Hydrostatic testing
  • Grain size and microstructure checks for nuclear-grade orders
  • Positive material identification (PMI) and third-party inspection

Why Choose Riyaarth Overseas

Riyaarth Overseas sources Inconel 690 pipes and tubes from qualified nickel alloy mills and supplies them cut to length or U-bent as per drawing. Each lot comes with EN 10204 3.1 certificates and heat traceability, and we pack in wooden cases for safe export. We reply to enquiries quickly with price and delivery.

Applications

Nuclear powerSteam generator tubes, sleeves and related parts in pressurised water reactors.
Nitric acid productionTubes and piping handling hot nitric acid and oxidising process streams.
Nuclear fuel reprocessingEquipment exposed to nitric-hydrofluoric acid mixtures.
Coal gasificationComponents exposed to hot sulphur-bearing gases.
PetrochemicalHeat exchanger tubes and furnace parts in oxidising conditions.
Glass industryParts in contact with molten glass and high-temperature oxidising atmospheres.

Frequently asked questions

What is Inconel 690 used for?

It is used mainly for steam generator tubes in nuclear power plants, and for nitric acid and other oxidising service.

How is Inconel 690 different from Inconel 600?

Inconel 690 has about twice the chromium of 600, giving much better resistance to stress corrosion cracking and oxidising media.

Which ASTM standards cover Inconel 690 tubes?

ASTM B167 covers seamless pipe and tube, and ASTM B163 covers condenser, heat exchanger and steam generator tubes.

Can Inconel 690 tubes be supplied U-bent?

Yes. Heat exchanger and steam generator tubes can be supplied U-bent to drawing, with bend stress relief where specified.