Request Quote
  1. Home
  2. Products
  3. Monel
  4. Monel 400 Pipes & Tubes

Monel 400 Pipes & Tubes

Monel 400 (UNS N04400) nickel-copper seamless and welded pipes and tubes to ASTM B165 and B163, supplied with EN 10204 3.1 certificates by Riyaarth Overseas.

Monel 400 Pipes & Tubes by Riyaarth Overseas

Monel 400 is a solid-solution nickel-copper alloy, UNS N04400 and Werkstoff 2.4360, with about two thirds nickel and one third copper. It cannot be hardened by heat treatment, but it combines good strength with excellent resistance to seawater, brackish water, hydrofluoric acid and alkalis. It keeps its toughness down to sub-zero temperatures and is one of the few alloys used routinely in hydrofluoric acid service.

Seamless Monel 400 pipe and tube are made to ASTM B165 / ASME SB165, while condenser and heat exchanger tubes are ordered to ASTM B163. Welded pipe and tube are covered by ASTM B725 and B730. Riyaarth Overseas supplies and exports Monel 400 pipes and tubes for marine, chemical, refinery and power plant buyers, with full mill documentation.

When ordering, buyers usually state the specification, the condition (annealed or stress relieved), the size as NPS and schedule or OD and wall, and the length. Monel 400 piping is commonly joined by TIG or MIG welding with nickel-copper filler metal, and it can also be joined to steel or copper nickel with suitable nickel-based consumables. Because Monel 400 can suffer stress corrosion cracking in moist, aerated hydrofluoric acid vapour and in mercury salts, these conditions should be reviewed at the design stage, and stress relieving after cold forming is often specified for such duties.

Key Features

Seawater and marine resistance: Monel 400 has very low corrosion rates in flowing seawater and resists cavitation and erosion, which is why it is used for seawater piping, pump parts and heat exchanger tubes.

Hydrofluoric acid service: The alloy is one of the standard materials for hydrofluoric acid alkylation units and HF handling equipment, provided the acid is free of aeration.

Resistance to alkalis and salts: It handles caustic soda, neutral and alkaline salt solutions and many organic compounds without stress corrosion cracking.

Good low-temperature toughness: Monel 400 has no ductile to brittle transition, so it keeps strength and toughness at cryogenic temperatures.

Specifications

ParameterDetails
StandardsASTM B165 / ASME SB165, ASTM B163 / ASME SB163, ASTM B725 / ASME SB725, ASTM B730 / ASME SB730
Grade / UNSMonel 400, UNS N04400, W.Nr. 2.4360
Outside diameter rangeSeamless tube from 6.35 mm (1/4 in) OD; pipe NPS 1/8 in to 8 in seamless, larger sizes welded
Wall thickness / scheduleSCH 5S, 10S, 40S, 80S, 160, XXS; tube wall in BWG or mm
LengthSingle random, double random and cut lengths
TypeSeamless, welded, welded and drawn
EndsPlain ends, bevelled ends, threaded ends on request
Form / finishRound, U-bent, coiled; annealed or stress relieved, pickled or bright annealed
Test certificateEN 10204 3.1 mill test certificate as standard; EN 10204 3.2 with third-party inspection on request

Chemical Composition

ElementComposition (%)
Nickel (Ni, incl. Co)63.0 min
Copper (Cu)28.0 – 34.0
Iron (Fe)2.5 max
Manganese (Mn)2.0 max
Carbon (C)0.3 max
Silicon (Si)0.5 max
Sulphur (S)0.024 max

Mechanical Properties

PropertyValue
Tensile strength (annealed)70 ksi (483 MPa) min
Yield strength, 0.2% offset (annealed)28 ksi (193 MPa) min
Elongation in 2 in (50 mm)35% min
Density8.80 g/cm³
Melting range1300 – 1350 °C

Values are ASTM B165 minimums for annealed material. Stress-relieved tube has higher strength and lower elongation.

Equivalent Grades

StandardDesignation
UNSN04400
Werkstoff Nr.2.4360
EN / DINNiCu30Fe
JISNW 4400
Common namesMonel 400, Alloy 400

Testing and Inspection

Monel 400 pipes and tubes are inspected to the ordered ASTM or ASME specification. Standard checks include:

  • Hydrostatic or eddy current test: Every length is pressure tested or eddy current tested as the specification allows.
  • Flattening and flaring tests: Ductility checks on samples from each lot.
  • Positive material identification (PMI): Confirms nickel and copper levels on every piece.
  • Ultrasonic testing: Available on request for heavy wall pipe.
  • Dimensional and visual inspection: OD, wall, length, straightness and surface condition.
  • Third-party inspection: Witness by your nominated inspection agency on request.

Why Choose Riyaarth Overseas

Riyaarth Overseas holds Monel 400 pipes and tubes in common sizes and works with recognised nickel alloy mills for project quantities, so we can offer cut lengths as well as full random lengths. Each consignment is supplied with EN 10204 3.1 mill test certificates and traceable heat marking.

We pack for export in seaworthy wooden boxes with end caps, and our team replies to enquiries promptly with price, availability and delivery details.

Applications

Marine engineeringSeawater lines, fire water piping and cooling systems on ships and offshore platforms.
RefineriesHydrofluoric acid alkylation units, crude column overhead condensers and feedwater heaters.
Chemical processingEquipment handling alkalis, chlorinated solvents and fluorine compounds.
DesalinationBrine heaters and evaporator tubing in multi-stage flash plants.
Power generationFeedwater heater tubes and steam generator components.
Hydrocarbon processingProcess piping and heat exchanger tubing in petrochemical units handling salty or acidic streams.

Frequently asked questions

What is the ASTM specification for Monel 400 seamless pipe?

Seamless Monel 400 pipe and tube are supplied to ASTM B165 / ASME SB165. Heat exchanger and condenser tubes can also be ordered to ASTM B163.

Is Monel 400 magnetic?

Monel 400 is weakly magnetic at room temperature. Its Curie point is close to ambient, so the magnetic response varies with exact composition and temperature.

Why is Monel 400 used in hydrofluoric acid service?

Monel 400 forms a stable protective film in hydrofluoric acid and has low corrosion rates across a wide range of concentrations, provided oxygen and oxidising salts are kept low.

Can Monel 400 be hardened by heat treatment?

No. Monel 400 is a solid-solution alloy and is strengthened only by cold work. Where higher strength is needed, the age-hardenable Monel K500 is used.