
Titanium Grade 5 Pipes & Tubes
Titanium Grade 5 (Ti-6Al-4V, UNS R56400) seamless pipes and tubes for high-strength aerospace, marine and oil field service, supplied by Riyaarth Overseas.

Titanium Grade 5, also known as Ti-6Al-4V, UNS R56400 and Werkstoff 3.7165, is an alpha-beta titanium alloy containing about 6 percent aluminium and 4 percent vanadium. It is the most widely used titanium alloy, with minimum tensile strength of 895 MPa, which is more than twice that of commercially pure Grade 2, while keeping a density of about 4.43 g/cm³.
Seamless pipe in Grade 5 is covered by ASTM B861 / ASME SB861. Grade 5 is not listed in ASTM B338, so tubes are usually supplied to B861 dimensions or to aerospace and purchaser specifications. The alloy is harder to cold work than commercially pure titanium, so tube is generally produced by hot extrusion and machining or controlled drawing.
Riyaarth Overseas supplies and exports Titanium Grade 5 pipes and tubes for structural, high-pressure and weight-sensitive applications in the aerospace, oil and gas, marine and medical sectors.
Grade 5 is welded by TIG with matching filler metal under full inert gas shielding, and stress relieving after welding is often specified for critical parts. Machining calls for sharp tools, low cutting speeds and plenty of coolant, since titanium conducts heat poorly. When enquiring, please state the specification, heat treatment condition, OD, wall or schedule, length and any ultrasonic or hardness requirements.
Key Features
High strength to weight ratio: With 895 MPa minimum tensile strength and a density near 4.43 g/cm³, Grade 5 gives one of the best strength to weight ratios of any common engineering metal.
Corrosion resistance: Grade 5 has the same protective oxide film as pure titanium, giving good resistance to seawater and chlorides, though slightly lower resistance than CP grades in some reducing media.
Heat treatable: The alloy can be supplied annealed or solution treated and aged to suit strength and toughness requirements.
Fatigue performance: Grade 5 has good fatigue strength, which makes it suitable for risers, hydraulic lines and rotating parts under cyclic load.
Specifications
| Parameter | Details |
|---|---|
| Standards | ASTM B861 / ASME SB861 (seamless pipe); tubes to B861 dimensions, AMS or purchaser specifications |
| Grade / UNS | Titanium Grade 5, Ti-6Al-4V, UNS R56400, W.Nr. 3.7165 |
| Outside diameter range | To order; sizes on enquiry |
| Wall thickness / schedule | SCH 10S, 40S, 80S or as per drawing |
| Length | Random and cut lengths |
| Type | Seamless (extruded, drawn or machined) |
| Ends | Plain ends, bevelled or machined ends on request |
| Form / finish | Round; annealed, pickled or machined finish |
| Test certificate | EN 10204 3.1 mill test certificate as standard; EN 10204 3.2 with third-party inspection on request |
Chemical Composition
| Element | Composition (%) |
|---|---|
| Aluminium (Al) | 5.5 – 6.75 |
| Vanadium (V) | 3.5 – 4.5 |
| Iron (Fe) | 0.40 max |
| Oxygen (O) | 0.20 max |
| Carbon (C) | 0.08 max |
| Nitrogen (N) | 0.05 max |
| Hydrogen (H) | 0.015 max |
| Titanium (Ti) | Balance |
Mechanical Properties
| Property | Value |
|---|---|
| Tensile strength | 130 ksi (895 MPa) min |
| Yield strength, 0.2% offset | 120 ksi (828 MPa) min |
| Elongation in 2 in (50 mm) | 10% min |
| Density | 4.43 g/cm³ |
Minimum values are for annealed pipe to ASTM B861.
Equivalent Grades
| Standard | Designation |
|---|---|
| UNS | R56400 |
| Werkstoff Nr. | 3.7165 |
| JIS | Class 60 |
| Common names | Ti-6Al-4V, Ti 6-4, Ti Gr 5 |
Testing and Inspection
Grade 5 pipes and tubes are inspected according to ASTM B861 or the agreed specification. Typical checks include:
- Ultrasonic testing: Volumetric inspection of the tube wall.
- Hydrostatic test: Pressure testing where specified.
- Tensile testing: Strength and elongation reported on the certificate.
- Chemical analysis: Including aluminium, vanadium and interstitial elements.
- Dimensional and visual inspection: OD, wall, length and surface.
- Third-party inspection: Witness inspection by your appointed agency on request.
Why Choose Riyaarth Overseas
Riyaarth Overseas sources Titanium Grade 5 pipes and tubes from established titanium mills and supplies them cut to length or in random lengths. Each consignment carries EN 10204 3.1 certificates with full chemical and mechanical results.
We pack material in wooden cases for export and give prompt offers against your specifications or drawings.
Applications






Frequently asked questions
What is Titanium Grade 5?
Titanium Grade 5 is the alloy Ti-6Al-4V, containing about 6 percent aluminium and 4 percent vanadium. It is much stronger than commercially pure titanium and is the most widely used titanium alloy.
Which ASTM standard covers Grade 5 titanium pipe?
Seamless Grade 5 pipe is covered by ASTM B861 / ASME SB861. ASTM B338 for heat exchanger tubes does not include Grade 5.
Is Grade 5 more corrosion resistant than Grade 2?
No. Both have good resistance to seawater and chlorides, but Grade 2 is generally preferred for corrosion service, while Grade 5 is chosen when strength is the priority.
What is Grade 23 titanium?
Grade 23 is Ti-6Al-4V ELI, a version with lower oxygen and iron for better toughness and damage tolerance, used mainly in medical and critical aerospace parts.
