Request Quote
  1. Home
  2. Products
  3. Alloy Steel
  4. ASTM A213 T11 Alloy Steel Tubes

ASTM A213 T11 Alloy Steel Tubes

ASTM A213 T11 seamless 1.25Cr-0.5Mo alloy steel tubes for boilers, superheaters and heat exchangers, supplied and exported by Riyaarth Overseas, Mumbai.

ASTM A213 T11 Alloy Steel Tubes by Riyaarth Overseas

ASTM A213 T11 tubes are seamless ferritic alloy steel tubes for boilers, superheaters and heat exchangers. Grade T11 (UNS K11597) is a 1.25% chromium, 0.5% molybdenum steel with added silicon, which gives better resistance to oxidation and creep at elevated temperature than carbon steel. ASTM A213 sets the chemistry, heat treatment, mechanical properties and tests, and ASME SA213 is its identical boiler code version.

T11 is one of the most common chrome-moly tube grades in steam generation and refinery heaters because it is affordable, easy to weld with the right preheat, and well proven in service up to roughly 550°C. Riyaarth Overseas supplies and exports ASTM A213 T11 tubes from established mill sources, in straight lengths or U-bent to drawing, with EN 10204 3.1 certificates.

Key Features

Elevated temperature strength: Chromium and molybdenum raise creep strength, so T11 holds pressure at temperatures where carbon steel tubes would deform.

Oxidation resistance: The 1.00 – 1.50% chromium and 0.50 – 1.00% silicon help form a protective scale in hot flue gas and steam.

Proven weldability: T11 welds well with matching filler, preheat and post-weld heat treatment, which suits boiler and heater fabrication.

Wide availability: As a standard boiler grade, T11 is made by many mills and is quick to source in common sizes.

Specifications

SpecificationDetails
StandardASTM A213 / ASME SA213
Grade / UNSGrade T11 / UNS K11597
Outside diameter range3.2 mm to 127 mm (1/8 in to 5 in), the range covered by ASTM A213
Wall thickness0.4 mm to 12.7 mm (0.015 in to 0.500 in), minimum or average wall
LengthRandom lengths, fixed lengths and U-bent tubes to drawing
TypeSeamless, hot finished or cold drawn
Heat treatmentFull or isothermal anneal, or normalise and temper
EndsPlain ends, square cut, deburred
Form / finishRound; black, pickled or varnished outside, as ordered
Test certificateEN 10204 3.1; 3.2 with third-party inspection (TPI) on request

Chemical Composition

ElementComposition (%)
Carbon (C)0.05 – 0.15
Manganese (Mn)0.30 – 0.60
Phosphorus (P)0.025 max
Sulphur (S)0.025 max
Silicon (Si)0.50 – 1.00
Chromium (Cr)1.00 – 1.50
Molybdenum (Mo)0.44 – 0.65

Mechanical Properties

PropertyValue
Tensile strength415 MPa (60 ksi) min
Yield strength205 MPa (30 ksi) min
Elongation in 50 mm30% min
Hardness163 HBW / 85 HRB max
Density7.85 g/cm³ (approx.)

Equivalent Grades

SystemEquivalent
UNSK11597
ASMESA213 T11
JIS G 3462STBA 23
EN 10216-2 (closest, not identical)13CrMo4-5 (1.7335)

Testing and Inspection

Every lot is tested to ASTM A213 / A1016 and the general requirements it references, plus any supplementary requirements on the order:

  • Hydrostatic or non-destructive electric test: each tube or pipe is hydro tested or checked by eddy current or ultrasonic testing.
  • Tensile test: tensile strength, yield strength and elongation.
  • Flattening and flaring tests: to confirm ductility.
  • Hardness test: where the grade or order sets a hardness limit.
  • Positive material identification (PMI): to confirm chromium and molybdenum on every length when ordered.
  • Dimensional and visual inspection: outside diameter, wall, length and surface.
  • Third-party inspection: by agencies such as TUV, BV, SGS or Lloyd's Register on request.

Why Choose Riyaarth Overseas

Riyaarth Overseas sources ASTM A213 T11 tubes from established boiler tube mills and keeps common sizes available for short lead times. We supply cut lengths and U-bends to drawing, with EN 10204 3.1 mill test certificates, IBR documentation where required, and seaworthy export packing. Send your size list for a quick quote.

Applications

Power generationUsed in superheater, reheater and economiser sections of utility and industrial boilers.
RefineriesInstalled as heater and furnace tubes in crude and vacuum units and in hydrotreaters.
PetrochemicalsUsed for process heaters and transfer lines handling hot hydrocarbons.
Heat exchangersSelected for shell and tube exchangers in high temperature steam and process service.
Waste heat recoveryUsed in heat recovery steam generators behind gas turbines and furnaces.
Sugar and process boilersA common tube grade for medium pressure boilers in sugar, paper and textile plants.

Frequently asked questions

What is the difference between T11 and T12?

Both are chrome-moly grades with similar molybdenum. T11 has 1.00 – 1.50% chromium and 0.50 – 1.00% silicon, while T12 has 0.80 – 1.25% chromium and 0.50% silicon max. T11 has slightly better oxidation resistance.

What is the maximum service temperature of T11 tubes?

It depends on the design code and pressure, but T11 is commonly used up to around 550°C. Check the allowable stresses in the applicable code, such as ASME Section I or IBR.

Do T11 tubes need post-weld heat treatment?

Usually yes. Preheat and post-weld heat treatment are normally required by the design code, depending on wall thickness and diameter.

Is ASTM A213 T11 the same as ASME SA213 T11?

Yes. ASME SA213 adopts ASTM A213, so the requirements are the same and tubes are usually dual certified.