
Stainless Steel 253 MA Pipes & Tubes
Stainless steel 253 MA pipes and tubes (UNS S30815, 1.4835) to ASTM A312 and A213 for oxidation resistance up to 1150 °C, exported by Riyaarth Overseas.

Stainless steel 253 MA (UNS S30815, EN 1.4835) is a heat resistant austenitic grade with about 21% chromium and 11% nickel, alloyed with silicon, nitrogen and rare earth metals such as cerium. The rare earth additions make the oxide scale adhere strongly to the surface, which gives oxidation resistance close to higher nickel alloys, while nitrogen raises strength at temperature. 253 MA is a trademark of Outokumpu; the generic grade is S30815.
Pipe and tube in S30815 are covered by ASTM A312 and A213, and the grade is used in furnaces, burners and other hot equipment running up to about 1150 °C in air. Riyaarth Overseas supplies and exports S30815 pipes and tubes for heat treatment and thermal processing applications.
Key Features
Oxidation resistance: Cerium helps keep a dense, adherent oxide layer, giving good scaling resistance up to about 1150 °C in air.
High strength: Nitrogen and carbon give a minimum yield strength of 310 MPa under ASTM A312, well above 309 and 310 grades.
Lean nickel: Around 11% nickel gives good performance in reducing and sulphur bearing atmospheres compared with high nickel alloys.
Creep resistance: Good creep strength at high temperature, which allows thinner sections than 309S or 310S.
Specifications
| Parameter | Details |
|---|---|
| Standards | ASTM A312 / ASME SA312 (pipe), ASTM A213 / ASME SA213 (tube), EN 10095 |
| Grade / UNS | UNS S30815, EN 1.4835 |
| Outside diameter range | Pipe: 1/8 in to 12 in NPS; tube: from 6 mm OD upward, to order |
| Wall thickness / schedule | Schedule 10S, 40S, 80S; tube wall to order |
| Length | Single random, double random and cut lengths |
| Type | Seamless and welded |
| Ends | Plain end, bevelled end |
| Form / finish | Round; annealed and pickled |
| Test certificate | EN 10204 3.1 mill test certificate as standard; EN 10204 3.2 with third-party inspection on request |
S30815 is a specialist grade and is often supplied from mill production rather than stock, so lead time should be confirmed at the enquiry stage. Give the operating temperature and atmosphere so the grade choice can be checked against 309S and 310S.
Chemical Composition
Limits per ASTM A312 for UNS S30815.
| Element | Composition (%) |
|---|---|
| Carbon (C) | 0.05 – 0.10 |
| Manganese (Mn) | 0.80 max |
| Phosphorus (P) | 0.040 max |
| Sulphur (S) | 0.030 max |
| Silicon (Si) | 1.40 – 2.00 |
| Chromium (Cr) | 20.0 – 22.0 |
| Nickel (Ni) | 10.0 – 12.0 |
| Nitrogen (N) | 0.14 – 0.20 |
| Cerium (Ce) | 0.03 – 0.08 |
Mechanical Properties
Room temperature minimums per ASTM A312 for UNS S30815. Strength at service temperature should be taken from the design code or mill data.
| Property | Value |
|---|---|
| Tensile strength, min | 600 MPa (87 ksi) |
| Yield strength (0.2%), min | 310 MPa (45 ksi) |
| Elongation in 50 mm, min | 35% longitudinal, 25% transverse (ASTM A312) |
| Maximum service temperature in air | approx. 1150 °C (mill data) |
Equivalent Grades
| System | Designation |
|---|---|
| UNS | S30815 |
| EN / Werkstoff | 1.4835 (X9CrNiSiNCe21-11-2) |
| Trade name | 253 MA (Outokumpu) |
There is no JIS equivalent in common use. Order by UNS S30815 or EN 1.4835 so that the cerium and nitrogen additions are covered.
Testing and Inspection
S30815 pipes and tubes are tested to ASTM A312 or A213 as ordered.
- Hydrostatic or eddy current test: On every length.
- Positive material identification: Confirms chromium, nickel and silicon levels.
- Flattening and flaring tests: To confirm ductility.
- Mechanical tests: Tensile, yield and elongation per lot.
- Dimensional and visual inspection: OD, wall, length and surface checks to the standard.
- Third-party inspection: Witness inspection with EN 10204 3.2 certification on request.
Certificates list the full chemistry including cerium and nitrogen, along with tensile results and heat treatment, so the material can be confirmed as S30815 and not a standard 309 or 310 grade.
Why Choose Riyaarth Overseas
Riyaarth Overseas sources S30815 pipes and tubes from specialist heat resistant steel mills and supplies them with EN 10204 3.1 certificates and heat traceability. We cut to length to suit furnace drawings and pack for export. Send your sizes for a quick quote.
Applications






Frequently asked questions
What is 253 MA stainless steel?
253 MA is the Outokumpu trade name for UNS S30815 (EN 1.4835), a heat resistant austenitic stainless steel with silicon, nitrogen and cerium for oxidation resistance and strength at high temperature.
How does 253 MA compare with 310S?
S30815 has lower nickel than 310S but higher strength, and its cerium bearing oxide scale gives oxidation resistance at similar temperatures. It is often used to replace 310S or 309S at lower cost or thinner section.
What is the maximum service temperature of 253 MA?
Mill data gives a maximum of about 1150 °C in air. The real limit depends on the atmosphere, load and thermal cycling.
Is 253 MA used for corrosion resistance at room temperature?
No. It is a heat resistant grade designed for high temperature oxidation service, not for wet corrosion, where grades such as 316L are normally chosen.
