Request Quote
  1. Home
  2. Products
  3. Stainless Steel
  4. Stainless Steel 316Ti Pipes & Tubes

Stainless Steel 316Ti Pipes & Tubes

Stainless steel 316Ti pipes and tubes (UNS S31635, 1.4571) to ASTM A312 and EN 10216-5, titanium stabilised, supplied and exported by Riyaarth Overseas.

Stainless Steel 316Ti Pipes & Tubes by Riyaarth Overseas

Stainless steel 316Ti (UNS S31635, EN 1.4571) is a titanium stabilised version of 316. Titanium combines with carbon and nitrogen, so chromium carbides do not form at grain boundaries when the steel is held between about 425 °C and 815 °C. This protects the material from intergranular corrosion after welding or during long service at those temperatures.

316Ti is widely specified in Europe, where 1.4571 tube to EN 10216-5 and EN 10217-7 is a common choice for chemical plants and heat exchangers. Riyaarth Overseas supplies and exports 316Ti seamless and welded pipes and tubes to ASTM and EN standards, with full mill certification.

Key Features

Titanium stabilised: Titanium of at least five times carbon plus nitrogen ties up carbon and prevents sensitisation in the weld zone.

Molybdenum bearing: With 2.00% to 3.00% Mo, it gives 316 level resistance to pitting and crevice corrosion.

Strength at temperature: Stabilisation allows good strength and resistance to intergranular attack at elevated temperature.

European standard grade: Matches the widely used 1.4571, making it easy to replace existing installations built to EN standards.

Specifications

ParameterDetails
StandardsASTM A312 / ASME SA312 (pipe), ASTM A213 / ASME SA213 (tube), EN 10216-5 (seamless), EN 10217-7 (welded)
Grade / UNSTP316Ti (S31635), EN 1.4571
Outside diameter rangePipe: 1/8 in to 24 in NPS; tube: from 6 mm OD upward
Wall thickness / scheduleSchedule 5S to 80S and heavier on request; tube wall to order
LengthSingle random, double random and cut lengths
TypeSeamless and welded
EndsPlain end, bevelled end
Form / finishRound; annealed and pickled
Test certificateEN 10204 3.1 mill test certificate as standard; EN 10204 3.2 with third-party inspection on request

Projects designed to European standards often call for 1.4571 to EN 10216-5 or EN 10217-7, while ASME projects call for TP316Ti to SA312. Tubes can be supplied with dual marking where the mill certifies both, which simplifies replacement work on existing plant.

Chemical Composition

Limits per ASTM A312 for UNS S31635. EN 1.4571 limits differ slightly.

ElementComposition (%)
Carbon (C)0.08 max
Manganese (Mn)2.00 max
Phosphorus (P)0.045 max
Sulphur (S)0.030 max
Silicon (Si)0.75 max
Chromium (Cr)16.0 – 18.0
Nickel (Ni)10.0 – 12.0
Molybdenum (Mo)2.00 – 3.00
Nitrogen (N)0.10 max
Titanium (Ti)5 × (C + N) min, 0.70 max

Mechanical Properties

Room temperature minimums per ASTM A312 for UNS S31635. EN 10216-5 sets its own minimums for 1.4571, which should be used on EN projects.

PropertyValue
Tensile strength, min515 MPa (75 ksi)
Yield strength (0.2%), min205 MPa (30 ksi)
Elongation in 50 mm, min35% longitudinal, 25% transverse
HardnessHBW 192 max / HRB 90 max (ASTM A213, A249, A269 tubes)
Densityapprox. 8.0 g/cm³

Equivalent Grades

SystemDesignation
UNSS31635
EN / Werkstoff1.4571 (X6CrNiMoTi17-12-2)
JISSUS316Ti
AISI316Ti

Note that EN 1.4571 composition limits are not identical to ASTM S31635, so dual certification should be confirmed on the mill certificate.

Testing and Inspection

316Ti pipes and tubes are tested to the ordered ASTM or EN standard.

  • Hydrostatic or eddy current test: Every length is pressure tested or checked by a non-destructive electric test.
  • Intergranular corrosion test: ASTM A262 Practice E or EN ISO 3651-2 to confirm resistance after sensitising.
  • Flattening and flaring tests: To confirm ductility.
  • Positive material identification: Confirms the presence of titanium and molybdenum.
  • Mechanical tests: Tensile, yield, elongation and hardness per lot.
  • Third-party inspection: Available with EN 10204 3.2 certificates.

Certificates list titanium and carbon content so the stabilisation ratio can be checked, along with the heat treatment and the results of any corrosion test ordered.

Why Choose Riyaarth Overseas

Riyaarth Overseas supplies 316Ti pipes and tubes from European and Indian mill sources, with certificates to EN 10204 3.1 that show both ASTM and EN grade where the material is dual marked. We cut to length and pack securely for export. Send us your specification for a prompt offer.

Applications

Chemical industryProcess piping and vessels where welding without later heat treatment is required.
Heat exchangersTubes for exchangers handling chloride bearing or acidic media at moderate temperature.
Pulp and paperBleach plant and digester lines.
Oil refiningLines exposed to temperatures in the sensitising range.
Textile and dyeingDye house piping exposed to hot, acidic liquors.
Exhaust and flue systemsDucts and bellows in hot, mildly corrosive exhaust gas.

Frequently asked questions

What is the difference between 316Ti and 316L?

Both are designed to avoid sensitisation. 316L does it by keeping carbon very low, while 316Ti adds titanium to tie up carbon. 316Ti keeps better strength at high temperature, while 316L is more common outside Europe.

Is 316Ti the same as 1.4571?

Yes, 1.4571 (X6CrNiMoTi17-12-2) is the European designation for titanium stabilised 316. The composition limits in EN and ASTM differ slightly, so check which standard the project requires.

Can 316L replace 316Ti?

In many wet corrosion services 316L is accepted as a substitute. For long service in the 425 °C to 815 °C range or where the design code names 1.4571, 316Ti should be kept.

Why is 316Ti hard to polish?

Titanium carbonitride particles in the steel can leave small marks on a mirror polished surface, so 316Ti is not usually chosen for decorative polished parts.