Request Quote
  1. Home
  2. Products
  3. Stainless Steel
  4. Stainless Steel Seamless Tubes to EN 10216-5

Stainless Steel Seamless Tubes to EN 10216-5

Seamless stainless steel tubes to EN 10216-5 in 1.4301, 1.4307, 1.4404 and 1.4571, test category TC1 or TC2, supplied and exported by Riyaarth Overseas.

Stainless Steel Seamless Tubes to EN 10216-5 by Riyaarth Overseas

EN 10216-5 is the European standard for seamless stainless steel tubes used for pressure purposes. It is one part of the EN 10216 series and is the reference specification for tubes that go into equipment built under the Pressure Equipment Directive, such as heat exchangers, process piping, boilers and pressure vessels. The standard covers austenitic, austenitic-ferritic (duplex) and a small number of other stainless grades, identified by their EN steel number and name, for example 1.4404 (X2CrNiMo17-12-2).

Buyers specify EN 10216-5 when a project is designed to European codes such as EN 13445 or EN 13480, or when the end user asks for steel numbers rather than ASTM grades. Riyaarth Overseas supplies and exports EN 10216-5 tubes in the common austenitic grades from stock and mill sources, with inspection documents to EN 10204 and test category confirmed on every order.

Key Features

Two test categories: The standard defines test category 1 (TC1) and test category 2 (TC2). TC2 adds non-destructive testing over the full length and more extensive testing, and is chosen for more demanding pressure duty.

Grades by EN steel number: Each grade has a fixed composition and mechanical property range, which avoids the ambiguity of trade names when tubes are ordered across countries.

Proof strength at Rp0.2 and Rp1.0: Austenitic grades carry both 0.2% and 1.0% proof strength minimums, and the standard also gives elevated temperature proof values used in pressure design.

Solution annealed delivery: Tubes are delivered in the solution annealed condition (+AT) for austenitic grades, giving full corrosion resistance and a structure suited to bending and expansion.

Specifications

ItemDetails
StandardEN 10216-5 (seamless stainless steel tubes for pressure purposes)
Common grades1.4301, 1.4307, 1.4401, 1.4404, 1.4541, 1.4571; other listed grades on request
Outside diameterSmall instrumentation sizes up to large-bore process sizes, to the order
Wall thicknessAs ordered; dimensions and tolerances per EN ISO 1127 tolerance classes
LengthRandom lengths, fixed lengths and cut lengths
TypeSeamless, hot finished or cold finished
EndsPlain ends, bevelled ends on request
Form / finishSolution annealed and pickled; bright annealed for cold finished tube on request
Test categoryTC1 or TC2 as specified
Test certificateEN 10204 3.1 standard; EN 10204 3.2 with third-party witness on request

Chemical Composition

Composition limits for the most requested grades (maximum unless a range is shown).

Element1.43011.43071.44041.4571
Carbon (C)0.070.0300.0300.08
Silicon (Si)1.001.001.001.00
Manganese (Mn)2.002.002.002.00
Phosphorus (P)0.0400.0400.0400.040
Sulphur (S)0.0150.0150.0150.015
Chromium (Cr)17.0 – 19.517.5 – 19.516.5 – 18.516.5 – 18.5
Nickel (Ni)8.0 – 10.58.0 – 10.010.0 – 13.010.5 – 13.5
Molybdenum (Mo)……2.00 – 2.502.00 – 2.50
Nitrogen (N)0.110.110.11…
Titanium (Ti)………5 x C – 0.70

Mechanical Properties

Room temperature values in the solution annealed condition (1.4571 shown for cold finished tube).

GradeRp0.2 min (MPa)Rp1.0 min (MPa)Rm (MPa)Elongation A min, long. / trans. (%)
1.4301195230500 – 70040 / 35
1.4307180215460 – 68040 / 35
1.4404190225490 – 69040 / 30
1.4571210245500 – 73035 / 30

Equivalent Grades

EN numberEN nameNearest UNSNearest AISI
1.4301X5CrNi18-10S30400304
1.4307X2CrNi18-9S30403304L
1.4404X2CrNiMo17-12-2S31603316L
1.4571X6CrNiMoTi17-12-2S31635316Ti

Testing and Inspection

Testing follows the test category ordered. Every tube is leak tested, and TC2 tubes also receive full-length non-destructive testing.

  • Leak tightness: Hydrostatic test or an electromagnetic test in place of it, as the standard permits.
  • Non-destructive testing: Eddy current or ultrasonic testing for TC2 tubes.
  • Mechanical tests: Tensile test, flattening, ring expanding or drift expanding test according to size and category.
  • Intergranular corrosion: Test to EN ISO 3651-2 when ordered.
  • Material identification: Positive material identification (PMI) and visual and dimensional checks.
  • Third-party inspection: Inspection by the buyer or a nominated agency for 3.2 certification.

Why Choose Riyaarth Overseas

Riyaarth Overseas supplies EN 10216-5 tubes from ready stock and approved mill sources, and confirms grade, test category and dimensional tolerance class before dispatch. Tubes can be cut to length and are shipped with EN 10204 3.1 mill test certificates, or 3.2 where required, in seaworthy export packing. Send your size list for a quick quotation.

Applications

Heat exchangersShell and tube bundles built to European pressure codes use EN 10216-5 tubes in 1.4404 and 1.4307.
Chemical plantsProcess lines carrying acids, solvents and caustic solutions use molybdenum-bearing grades for pitting resistance.
Pharmaceutical and foodLow-carbon grades are used for process and utility lines where welded joints must not sensitise.
Power generationAustenitic tubes are used in feedwater heaters, condensers and auxiliary systems.
Pressure vesselsNozzles and internal piping in vessels designed to EN 13445 call for tube to this standard.
InstrumentationSmall-bore seamless tube is used for impulse lines, sampling lines and hydraulic connections.

Frequently asked questions

What is the difference between TC1 and TC2 in EN 10216-5?

TC2 tubes receive full-length non-destructive testing and additional verification, while TC1 covers the basic testing scheme. The designer chooses the category based on service conditions.

Is EN 10216-5 equivalent to ASTM A213 or A312?

The grades are close in composition but the standards are not identical. Mechanical limits, testing and tolerances differ, so a tube certified to one standard is not automatically compliant with the other unless dual certified.

Which EN 10216-5 grade is used most often?

Grade 1.4404 (316L type) and 1.4307 (304L type) are the most common because their low carbon content suits welded construction.

Can you supply dual-certified tubes?

Yes. Many mills certify tubes to EN 10216-5 together with ASTM A213 or A269 where the composition and test requirements of both standards are met. Ask for dual certification at enquiry stage.