
Stainless Steel Welded Pipes & Tubes
Stainless steel welded pipes and tubes to ASTM A312, A358, A249, A269 and A270 in 304L and 316L, stocked and exported by Riyaarth Overseas from Mumbai.

Stainless steel welded pipes and tubes are formed from strip, sheet or plate and joined along a longitudinal seam, usually by automatic TIG welding without filler for thinner walls, or by electric fusion welding with filler for large diameters. After welding the product is solution annealed and pickled, and the weld bead may be rolled or ground for a smooth bore.
Welded product offers consistent wall thickness, good concentricity and a lower cost than seamless, especially in thin walls and large diameters. Riyaarth Overseas supplies and exports welded stainless steel pipe to ASTM A312 and A358, heat exchanger tube to ASTM A249, and general and sanitary tube to ASTM A269 and A270.
Key Features
Uniform wall: Made from flat rolled strip or plate with close thickness control, giving an even wall around the circumference.
Large diameters: Electric fusion welded pipe to ASTM A358 covers large bores that are not practical in seamless form.
Cost efficient: For low and medium pressure lines, welded pipe usually costs less than seamless of the same grade and size.
Annealed weld zone: Solution annealing after welding restores corrosion resistance in the weld and heat affected zone.
Specifications
| Parameter | Details |
|---|---|
| Standards | ASTM A312 / ASME SA312 (welded pipe), ASTM A358 / ASME SA358 (EFW pipe), ASTM A249 / ASME SA249 (welded heat exchanger tube), ASTM A269 (general service tube), ASTM A270 (sanitary tube), ASTM A554 (mechanical tube) |
| Grades / UNS | TP304 (S30400), TP304L (S30403), TP316 (S31600), TP316L (S31603), with 321, 317L, 309S and 310S on request |
| Outside diameter range | Pipe: 1/8 in to large bore EFW sizes; tube: from 6 mm OD upward |
| Wall thickness / schedule | Schedule 5S, 10S, 40S, 80S for pipe; tube wall to order in mm or BWG |
| Length | Single random, double random and cut lengths |
| Type | Welded (TIG, without filler), EFW (with filler), ERW for mechanical tube |
| Ends | Plain end, bevelled end |
| Form / finish | Round, square and rectangular (A554); annealed and pickled, bright annealed, polished |
| Test certificate | EN 10204 3.1 mill test certificate as standard; EN 10204 3.2 with third-party inspection on request |
For welded product, also state whether the weld bead should be rolled, ground or left as welded on the inside, and the ASTM A358 class where EFW pipe is ordered. Sanitary tube orders should give the required inside and outside surface finish.
Chemical Composition
Limits per ASTM A312. A249, A269 and A270 set closely similar limits for the same grades.
| Element | Composition (%) |
|---|---|
| Carbon (C) | 0.08 max (TP304, TP316), 0.035 max (TP304L, TP316L) |
| Manganese (Mn) | 2.00 max |
| Phosphorus (P) | 0.045 max |
| Sulphur (S) | 0.030 max |
| Silicon (Si) | 1.00 max |
| Chromium (Cr) | 18.0 – 20.0 (304 grades), 16.0 – 18.0 (316 grades) |
| Nickel (Ni) | 8.0 – 11.0 (TP304), 8.0 – 13.0 (TP304L), 11.0 – 14.0 (TP316), 10.0 – 14.0 (TP316L) |
| Molybdenum (Mo) | 2.00 – 3.00 (316 grades only) |
Mechanical Properties
| Property | Value |
|---|---|
| Tensile strength, min | 515 MPa (75 ksi) for 304 and 316; 485 MPa (70 ksi) for 304L and 316L |
| Yield strength (0.2%), min | 205 MPa (30 ksi) for 304 and 316; 170 MPa (25 ksi) for 304L and 316L |
| Elongation in 50 mm, min | 35% longitudinal (ASTM A312, A249) |
| Hardness | HBW 192 max / HRB 90 max (ASTM A213, A249, A269 tubes) |
Equivalent Grades
| Grade | UNS | EN / Werkstoff | JIS |
|---|---|---|---|
| 304 | S30400 | 1.4301 | SUS304 |
| 304L | S30403 | 1.4307 | SUS304L |
| 316 | S31600 | 1.4401 | SUS316 |
| 316L | S31603 | 1.4404 | SUS316L |
Testing and Inspection
Welded pipes and tubes are tested to the ordered standard, with particular attention to the weld seam.
- Hydrostatic or eddy current test: Each length is hydro tested or passes a non-destructive electric test.
- Weld radiography: Required for ASTM A358 Class 1 and Class 3 pipe, and available on request for other products.
- Flattening, flange and reverse bend tests: Check the soundness and ductility of the weld.
- Positive material identification: Confirms the grade of every length or of a sample, as ordered.
- Intergranular corrosion test: ASTM A262 Practice E to check the weld zone of L grades.
- Third-party inspection: Witness inspection with EN 10204 3.2 certification when the buyer requires it.
Certificates state the welding process, heat treatment and test results, and every length is stencilled with grade, size, standard, heat number and the letters WLD or EFW as the standard requires.
Why Choose Riyaarth Overseas
Riyaarth Overseas stocks welded stainless pipe and tube in the popular sizes and buys project quantities from established mills. Every supply carries an EN 10204 3.1 mill test certificate, lengths are cut to your requirement, and export loads are packed with end caps in bundles or wooden boxes. Share your enquiry and we will reply with a prompt quote.
Applications






Frequently asked questions
Is welded stainless pipe as corrosion resistant as seamless?
When it is solution annealed and pickled after welding, welded pipe of the same grade gives comparable corrosion resistance in most services. Low carbon L grades are preferred so that the weld zone is not sensitised.
What is the difference between ASTM A312 and A358 welded pipe?
ASTM A312 covers welded pipe made mostly without filler metal, in standard pipe sizes. ASTM A358 covers electric fusion welded pipe, usually with filler metal, for larger diameters, with classes that set radiography and heat treatment requirements.
Which standard is used for sanitary tubing?
ASTM A270 covers welded and seamless austenitic stainless sanitary tubing for the dairy and food industries, with defined surface finish requirements.
Can welded tube be used in heat exchangers?
Yes. ASTM A249 covers welded austenitic tubes for boilers, superheaters, heat exchangers and condensers, and is widely used for tube bundles.
