Request Quote
  1. Home
  2. Products
  3. Alloy Steel
  4. ASTM A213 T12 Alloy Steel Tubes

ASTM A213 T12 Alloy Steel Tubes

ASTM A213 T12 seamless 1Cr-0.5Mo alloy steel tubes for superheaters, reheaters and heat exchangers, stocked and exported by Riyaarth Overseas, Mumbai.

ASTM A213 T12 Alloy Steel Tubes by Riyaarth Overseas

ASTM A213 T12 tubes are seamless ferritic alloy steel boiler and heat exchanger tubes with about 1% chromium and 0.5% molybdenum. Grade T12 (UNS K11562) sits between the carbon-moly grade T1 and the higher silicon T11 grade, and it is covered by ASTM A213 and the matching ASME SA213 for boiler code work.

Designers choose T12 for superheater and reheater sections where carbon steel no longer has enough creep strength but the conditions do not call for 2.25Cr or 9Cr steels. Its lower silicon makes it easy to bend and weld. Riyaarth Overseas supplies and exports ASTM A213 T12 tubes from established mill sources, with full mill certification and cut or U-bent lengths.

Key Features

1Cr-0.5Mo chemistry: 0.80 – 1.25% chromium and 0.44 – 0.65% molybdenum give useful creep strength in medium temperature steam service.

Good formability: Lower silicon than T11 helps cold bending of tight U-bends and coils.

Weldable: T12 is welded with matching chrome-moly filler, using preheat and post-weld heat treatment as the code requires.

Slightly higher yield than T11: The minimum yield of 220 MPa is above the 205 MPa required for T11.

Specifications

SpecificationDetails
StandardASTM A213 / ASME SA213
Grade / UNSGrade T12 / UNS K11562
Outside diameter range3.2 mm to 127 mm (1/8 in to 5 in), the range covered by ASTM A213
Wall thickness0.4 mm to 12.7 mm (0.015 in to 0.500 in), minimum or average wall
LengthRandom lengths, fixed lengths and U-bent tubes to drawing
TypeSeamless, hot finished or cold drawn
Heat treatmentFull or isothermal anneal, or normalise and temper
EndsPlain ends, square cut, deburred
Form / finishRound; black, pickled or varnished outside, as ordered
Test certificateEN 10204 3.1; 3.2 with third-party inspection (TPI) on request

Chemical Composition

ElementComposition (%)
Carbon (C)0.05 – 0.15
Manganese (Mn)0.30 – 0.61
Phosphorus (P)0.025 max
Sulphur (S)0.025 max
Silicon (Si)0.50 max
Chromium (Cr)0.80 – 1.25
Molybdenum (Mo)0.44 – 0.65

Mechanical Properties

PropertyValue
Tensile strength415 MPa (60 ksi) min
Yield strength220 MPa (32 ksi) min
Elongation in 50 mm30% min
Hardness163 HBW / 85 HRB max
Density7.85 g/cm³ (approx.)

Equivalent Grades

SystemEquivalent
UNSK11562
ASMESA213 T12
JIS G 3462STBA 22
EN 10216-2 (closest, not identical)13CrMo4-5 (1.7335)

Testing and Inspection

Every lot is tested to ASTM A213 / A1016 and the general requirements it references, plus any supplementary requirements on the order:

  • Hydrostatic or non-destructive electric test: each tube or pipe is hydro tested or checked by eddy current or ultrasonic testing.
  • Tensile test: tensile strength, yield strength and elongation.
  • Flattening and flaring tests: to confirm ductility.
  • Hardness test: where the grade or order sets a hardness limit.
  • Positive material identification (PMI): to confirm chromium and molybdenum on every length when ordered.
  • Dimensional and visual inspection: outside diameter, wall, length and surface.
  • Third-party inspection: by agencies such as TUV, BV, SGS or Lloyd's Register on request.

Why Choose Riyaarth Overseas

Riyaarth Overseas sources ASTM A213 T12 tubes from established boiler tube mills, with common sizes available for quick dispatch. Tubes are supplied in cut lengths or U-bent to drawing, with EN 10204 3.1 mill test certificates and export packing in protected bundles. Share your size list and quantity for a prompt quote.

Applications

Utility boilersUsed in primary and secondary superheaters and reheaters operating at moderate temperatures.
Industrial boilersSpecified for steam generating and superheater tubes in captive power plants.
Heat recovery steam generatorsUsed in HRSG superheater modules behind gas turbines.
Refinery heatersUsed in convection sections of fired heaters.
Heat exchangersSelected for exchangers in hot steam and process service.
Process plantsUsed in fertiliser and chemical plant waste heat boilers.

Frequently asked questions

Where is T12 used instead of T22?

T12 is used where temperatures and pressures are moderate. T22, with about 2.25% chromium and 1% molybdenum, is chosen for hotter sections that need higher creep strength.

Is T12 the same chemistry as P12 pipe?

Yes. ASTM A213 T12 tubes and ASTM A335 P12 pipes share the same UNS number, K11562, and the same chemical limits.

Can T12 tubes be U-bent?

Yes. T12 bends well, and bends can be stress relieved if the code or drawing requires it.

What certificates come with T12 tubes?

Tubes are supplied with EN 10204 3.1 mill test certificates. EN 10204 3.2 certificates and IBR approval documents can be arranged on request.