Request Quote
  1. Home
  2. Products
  3. Alloy Steel
  4. ASTM A213 T22 Alloy Steel Tubes

ASTM A213 T22 Alloy Steel Tubes

ASTM A213 T22 seamless 2.25Cr-1Mo alloy steel tubes for high temperature boiler and refinery service, supplied and exported by Riyaarth Overseas, Mumbai.

ASTM A213 T22 Alloy Steel Tubes by Riyaarth Overseas

ASTM A213 T22 tubes are seamless 2.25% chromium, 1% molybdenum alloy steel tubes for boilers, superheaters and heat exchangers. Grade T22 (UNS K21590) has about twice the chromium and molybdenum of T11, which gives clearly higher creep strength and better resistance to oxidation and hydrogen attack at elevated temperature.

T22 has a long service record in power plants and refineries, especially in final superheaters, reheaters and hydroprocessing heaters. It is welded with matching 2.25Cr-1Mo filler, with preheat and post-weld heat treatment. Riyaarth Overseas supplies and exports ASTM A213 T22 tubes from established mill sources, in straight or U-bent lengths, with full mill certification.

Key Features

Higher creep strength: The 1.90 – 2.60% chromium and 0.87 – 1.13% molybdenum give better long term strength than T11 or T12.

Resistance to hydrogen attack: 2.25Cr-1Mo steel is widely used in hydrogen service in refineries, following the limits in API RP 941.

Oxidation resistance: Higher chromium improves resistance to steam side and fire side oxidation.

Established fabrication practice: Welding procedures, filler metals and PWHT cycles for T22 are well known and widely qualified.

Specifications

SpecificationDetails
StandardASTM A213 / ASME SA213
Grade / UNSGrade T22 / UNS K21590
Outside diameter range3.2 mm to 127 mm (1/8 in to 5 in), the range covered by ASTM A213
Wall thickness0.4 mm to 12.7 mm (0.015 in to 0.500 in), minimum or average wall
LengthRandom lengths, fixed lengths and U-bent tubes to drawing
TypeSeamless, hot finished or cold drawn
Heat treatmentFull or isothermal anneal, or normalise and temper
EndsPlain ends, square cut, deburred
Form / finishRound; black, pickled or varnished outside, as ordered
Test certificateEN 10204 3.1; 3.2 with third-party inspection (TPI) on request

Chemical Composition

ElementComposition (%)
Carbon (C)0.05 – 0.15
Manganese (Mn)0.30 – 0.60
Phosphorus (P)0.025 max
Sulphur (S)0.025 max
Silicon (Si)0.50 max
Chromium (Cr)1.90 – 2.60
Molybdenum (Mo)0.87 – 1.13

Mechanical Properties

PropertyValue
Tensile strength415 MPa (60 ksi) min
Yield strength205 MPa (30 ksi) min
Elongation in 50 mm30% min
Hardness163 HBW / 85 HRB max
Density7.85 g/cm³ (approx.)

Equivalent Grades

SystemEquivalent
UNSK21590
ASMESA213 T22
JIS G 3462STBA 24
EN 10216-210CrMo9-10 (1.7380)

Testing and Inspection

Every lot is tested to ASTM A213 / A1016 and the general requirements it references, plus any supplementary requirements on the order:

  • Hydrostatic or non-destructive electric test: each tube or pipe is hydro tested or checked by eddy current or ultrasonic testing.
  • Tensile test: tensile strength, yield strength and elongation.
  • Flattening and flaring tests: to confirm ductility.
  • Hardness test: where the grade or order sets a hardness limit.
  • Positive material identification (PMI): to confirm chromium and molybdenum on every length when ordered.
  • Dimensional and visual inspection: outside diameter, wall, length and surface.
  • Third-party inspection: by agencies such as TUV, BV, SGS or Lloyd's Register on request.

Why Choose Riyaarth Overseas

Riyaarth Overseas sources ASTM A213 T22 tubes from established boiler tube mills and can supply straight lengths or U-bends to drawing. Each lot carries EN 10204 3.1 mill test certificates, with 3.2 or IBR documentation on request, and is packed for export with end caps and bundling. Send your requirement for a quick quote.

Applications

Power plant superheatersUsed in final superheater and reheater sections where tube metal temperatures are high.
Refinery hydroprocessingSpecified for heater coils in hydrocracker and hydrotreater units handling hydrogen.
Steam headers and connecting tubesUsed for small bore connecting tubes between headers and coils.
Petrochemical furnacesInstalled in process heaters in ethylene and aromatics plants.
Heat exchangersSelected for high temperature, high pressure exchangers in steam service.
Waste heat boilersUsed in HRSGs and sulphur recovery boilers with hot gas conditions.

Frequently asked questions

How does T22 compare with T11?

T22 has more chromium (1.90 – 2.60%) and molybdenum (0.87 – 1.13%) than T11, which gives higher creep strength and better oxidation resistance. It is used for hotter sections of boilers and heaters.

What is the EN equivalent of T22?

The EN 10216-2 grade 10CrMo9-10 (1.7380) is the generally accepted equivalent of T22.

Is post-weld heat treatment needed for T22?

Yes, in most cases. Design codes require preheat and post-weld heat treatment for 2.25Cr-1Mo welds above certain thicknesses.

What pipe grade matches T22 tubes?

ASTM A335 P22 pipe has the same chemistry and is used for headers and piping alongside T22 tubes.