Request Quote
  1. Home
  2. Products
  3. Alloy Steel
  4. ASTM A335 P12 Alloy Steel Pipes

ASTM A335 P12 Alloy Steel Pipes

ASTM A335 P12 seamless 1Cr-0.5Mo alloy steel pipes for steam lines, headers and refinery piping, supplied and exported by Riyaarth Overseas, Mumbai.

ASTM A335 P12 Alloy Steel Pipes by Riyaarth Overseas

ASTM A335 P12 pipes are seamless chrome-moly alloy steel pipes with about 1% chromium and 0.5% molybdenum. Grade P12 (UNS K11562) is listed in ASTM A335 and ASME SA335 for high temperature service, and shares its chemistry with the A213 T12 tube grade.

P12 is used for steam lines, headers and process piping running hotter than carbon steel can handle in creep, but not hot enough to need P22 or P91. Its moderate alloy content keeps it economical and straightforward to fabricate. Riyaarth Overseas supplies and exports ASTM A335 P12 pipes from established seamless pipe mills, in standard schedules and lengths, with EN 10204 3.1 certificates.

Key Features

Moderate temperature strength: The chromium and molybdenum content gives creep strength above carbon steel for steam and process lines.

Economical alloy grade: Lower alloy content than P22 or P91 keeps material cost down where conditions allow.

Weldable: Welded with matching 1Cr-0.5Mo filler, with preheat and post-weld heat treatment as the code requires.

Matches T12 tubes: Shares chemistry with A213 T12, so headers and tubes can be specified in the same material.

Specifications

SpecificationDetails
StandardASTM A335 / ASME SA335
Grade / UNSGrade P12 / UNS K11562
Outside diameter rangeNPS 1/8 upwards, dimensions to ASME B36.10M
Wall thickness / scheduleSCH 10 to SCH 160, STD, XS, XXS, or specified wall
LengthSingle random, double random and cut lengths
TypeSeamless, hot finished or cold drawn
Heat treatmentFull or isothermal anneal, or normalise and temper
EndsPlain ends, bevelled ends to ASME B16.25
Form / finishRound; black, varnished or pickled, as ordered
Test certificateEN 10204 3.1; 3.2 with third-party inspection (TPI) on request

Chemical Composition

ElementComposition (%)
Carbon (C)0.05 – 0.15
Manganese (Mn)0.30 – 0.61
Phosphorus (P)0.025 max
Sulphur (S)0.025 max
Silicon (Si)0.50 max
Chromium (Cr)0.80 – 1.25
Molybdenum (Mo)0.44 – 0.65

Mechanical Properties

PropertyValue
Tensile strength415 MPa (60 ksi) min
Yield strength220 MPa (32 ksi) min
Elongation, longitudinal30% min
Elongation, transverse20% min
Density7.85 g/cm³ (approx.)

ASTM A335 does not set a hardness limit for P12 in the base specification.

Equivalent Grades

SystemEquivalent
UNSK11562
ASMESA335 P12
JIS G 3458STPA 22
EN 10216-2 (closest, not identical)13CrMo4-5 (1.7335)

Testing and Inspection

Every lot is tested to ASTM A335 / A999 and the general requirements it references, plus any supplementary requirements on the order:

  • Hydrostatic or non-destructive electric test: each tube or pipe is hydro tested or checked by eddy current or ultrasonic testing.
  • Tensile test: tensile strength, yield strength and elongation.
  • Flattening and flaring tests: to confirm ductility (flattening or bend test for pipe).
  • Hardness test: where the grade or order sets a hardness limit.
  • Positive material identification (PMI): to confirm chromium and molybdenum on every length when ordered.
  • Dimensional and visual inspection: outside diameter, wall, length and surface.
  • Third-party inspection: by agencies such as TUV, BV, SGS or Lloyd's Register on request.

Why Choose Riyaarth Overseas

Riyaarth Overseas sources ASTM A335 P12 pipes from established seamless mills and supplies them in standard schedules with plain or bevelled ends. Each lot includes EN 10204 3.1 mill test certificates, with IBR or 3.2 documents on request, and is packed for export with end caps. Send your sizes and quantity for a quick quote.

Applications

Power plantsUsed for steam piping, headers and drains in boilers and turbine systems.
RefineriesSpecified for hot hydrocarbon lines and heater piping at moderate temperatures.
Petrochemical plantsUsed in process piping where carbon steel creep limits are exceeded.
Fertiliser plantsUsed for steam and synthesis gas piping at elevated temperature.
Industrial boilersUsed for headers and connecting piping in captive and process boilers.
Heat exchangersUsed for exchanger nozzles and connecting piping in hot service.

Frequently asked questions

What is the difference between P11 and P12?

Both are chrome-moly grades. P11 has 1.00 – 1.50% chromium and 0.50 – 1.00% silicon, while P12 has 0.80 – 1.25% chromium and lower silicon. P11 has slightly better oxidation resistance.

Is A335 P12 suitable for IBR projects?

Yes. P12 pipes can be supplied with IBR documentation when required for boiler work in India.

What fittings are used with P12 pipe?

Butt weld fittings to ASTM A234 WP12 and flanges to ASTM A182 F12 are normally used with P12 pipe.

What sizes of P12 pipe can be supplied?

P12 pipes are supplied to ASME B36.10M sizes in schedules from SCH 10 up to XXS, in random or cut lengths.