Request Quote
  1. Home
  2. Products
  3. Alloy Steel
  4. ASTM A335 P92 Alloy Steel Pipes

ASTM A335 P92 Alloy Steel Pipes

ASTM A335 P92 seamless 9Cr-2W alloy steel pipes for ultra-supercritical main steam and reheat piping, supplied and exported by Riyaarth Overseas, Mumbai.

ASTM A335 P92 Alloy Steel Pipes by Riyaarth Overseas

ASTM A335 P92 pipes are seamless 9% chromium alloy steel pipes modified with about 1.5 – 2.0% tungsten, reduced molybdenum and small additions of vanadium, niobium, nitrogen and boron. Grade P92 (UNS K92460) is a creep strength enhanced ferritic steel with higher creep rupture strength than P91, especially at 600°C and above.

P92 is the usual choice for main steam and hot reheat piping in ultra-supercritical power plants, where it allows thinner walls than P91 at the same design conditions. Its properties depend on correct normalising and tempering and careful welding and post-weld heat treatment. Riyaarth Overseas supplies and exports ASTM A335 P92 pipes from established seamless mills with full certification.

Key Features

Higher creep rupture strength: Tungsten and boron additions give higher long term strength than P91.

Thinner, lighter piping: Higher allowable stresses reduce wall thickness, weight and support loads in large bore lines.

High strength minimums: Minimum tensile 620 MPa and yield 440 MPa.

Steam oxidation resistance: About 9% chromium gives oxidation resistance similar to P91.

Specifications

SpecificationDetails
StandardASTM A335 / ASME SA335
Grade / UNSGrade P92 / UNS K92460
Outside diameter rangeNPS 1/8 upwards, dimensions to ASME B36.10M
Wall thickness / scheduleSCH 10 to SCH 160, STD, XS, XXS, or specified wall
LengthSingle random, double random and cut lengths
TypeSeamless, hot finished or cold drawn
Heat treatmentNormalised and tempered
EndsPlain ends, bevelled ends to ASME B16.25
Form / finishRound; black, varnished or pickled, as ordered
Test certificateEN 10204 3.1; 3.2 with third-party inspection (TPI) on request

Chemical Composition

ElementComposition (%)
Carbon (C)0.07 – 0.13
Manganese (Mn)0.30 – 0.60
Phosphorus (P)0.020 max
Sulphur (S)0.010 max
Silicon (Si)0.50 max
Chromium (Cr)8.50 – 9.50
Molybdenum (Mo)0.30 – 0.60
Tungsten (W)1.50 – 2.00
Nickel (Ni)0.40 max
Vanadium (V)0.15 – 0.25
Niobium (Nb)0.04 – 0.09
Nitrogen (N)0.030 – 0.070
Boron (B)0.001 – 0.006
Aluminium (Al)0.02 max
Titanium (Ti)0.01 max
Zirconium (Zr)0.01 max

Mechanical Properties

PropertyValue
Tensile strength620 MPa (90 ksi) min
Yield strength440 MPa (64 ksi) min
Elongation, longitudinal20% min
Elongation, transverse13% min
Hardness250 HBW max

Equivalent Grades

SystemEquivalent
UNSK92460
ASMESA335 P92
EN 10216-2X10CrWMoVNb9-2 (1.4901)
Developmental nameNF616

Testing and Inspection

Creep strength enhanced ferritic steels need tighter control than plain chrome-moly grades. Testing to ASTM A335 / A999 and the order includes:

  • Hydrostatic or non-destructive electric test: on every length, with ultrasonic testing commonly specified for power plant use.
  • Tensile and hardness tests: to confirm strength and that hardness is within limits after normalising and tempering.
  • Flattening and flaring tests: to confirm ductility.
  • Positive material identification (PMI): to confirm Cr, Mo and the micro-alloying elements on every length.
  • Heat treatment records: normalising and tempering temperatures and times on the mill certificate.
  • Third-party and IBR inspection: available on request for boiler applications in India.

Why Choose Riyaarth Overseas

Riyaarth Overseas sources ASTM A335 P92 pipes from established seamless mills experienced in tungsten modified 9Cr steels. Supplies include EN 10204 3.1 certificates, heat treatment records, hardness results and PMI, with 3.2 or IBR inspection on request, and pipes are packed for export with end caps and bevel protection. Send your line list for a quote.

Applications

Ultra-supercritical main steamUsed for main steam lines operating at about 600°C and high pressure.
Hot reheat pipingSpecified for hot reheat lines in advanced coal fired units.
Boiler outlet headersUsed for superheater and reheater outlet headers where thick P91 walls would be impractical.
Large combined cycle plantsUsed in high pressure steam piping of large HRSG units.
Turbine bypass and connecting linesUsed for high temperature bypass and connecting piping.
Plant upgradesConsidered when raising steam conditions in existing units.

Frequently asked questions

When is P92 chosen over P91?

P92 is chosen where steam temperature and pressure are high enough that P91 would need very thick walls, typically in ultra-supercritical plants operating around 600°C.

What fittings and flanges match P92 pipe?

ASTM A234 WP92 butt weld fittings and ASTM A182 F92 forgings are used with P92 pipe.

Is P92 harder to weld than P91?

It follows similar principles but needs matching tungsten bearing filler, strict control of preheat and interpass temperature, and correct post-weld heat treatment.

What is the EN equivalent of P92?

EN 10216-2 grade X10CrWMoVNb9-2 (1.4901) is the European equivalent of P92.