Request Quote
  1. Home
  2. Products
  3. Alloy Steel
  4. ASTM A691 Carbon & Alloy Steel EFW Pipes

ASTM A691 Carbon & Alloy Steel EFW Pipes

ASTM A691 electric-fusion-welded carbon and alloy steel pipes, 16 in OD and larger, in 1-1/4CR, 2-1/4CR, 9CR and 91 grades, supplied by Riyaarth Overseas.

ASTM A691 Carbon & Alloy Steel EFW Pipes by Riyaarth Overseas

ASTM A691 covers carbon and alloy steel pipe that is electric-fusion-welded (EFW) from plate, with filler metal added, for high-pressure service at high temperatures. The standard applies to pipe of 16 in. (406 mm) outside diameter and larger, with wall thickness up to 3 in. (75 mm). It fills the gap where seamless ASTM A335 pipe is not practical or economical in large diameters and heavy walls.

Each A691 grade is tied to a pressure vessel plate specification, so a 1-1/4CR pipe is formed from ASTM A387 Grade 11 plate and a 2-1/4CR pipe from A387 Grade 22 plate. A class number then defines heat treatment and whether radiography and pressure testing are applied. Riyaarth Overseas supplies and exports ASTM A691 pipes for refinery, power and petrochemical projects, sourced from qualified pipe makers with full plate and weld traceability.

Key Features

Large diameter, heavy wall: Pipe from 16 in. OD upward with walls up to 75 mm suits main steam, hot reheat and large process headers where seamless pipe is limited.

Plate-based grades: Carbon-molybdenum, carbon-manganese-silicon and chromium-molybdenum grades follow the chemistry and strength of the matching ASTM plate specification.

Class system: The first digit of the class gives the heat treatment and the second digit states whether the weld is radiographed, pressure tested, both or neither, so the buyer can match the pipe to the code.

Code acceptance: ASTM A691 is published by ASME as SA-691 and is used for ASME B31.1 and B31.3 piping and Section I and VIII equipment.

Specifications

ParameterDetails
StandardASTM A691 / ASME SA691
GradesCM-65, CM-70, CM-75, CMSH-70, CMS-75, CMSH-80, 1/2CR, 1CR, 1-1/4CR, 2-1/4CR, 3CR, 5CR, 9CR, 91
Classes10 to 13, 20 to 23, 30 to 33, 40 to 43, 50 to 53 (heat treatment plus testing)
Outside diameter range16 in. (406 mm) and larger
Wall thicknessUp to 3 in. (75 mm)
LengthAs ordered, single or double random and fixed lengths
TypeElectric-fusion-welded (EFW) with filler metal, longitudinal seam
EndsBevelled for butt welding, or plain
Form / finishRound pipe; heat treated, descaled, painted or varnished as specified
Test certificateEN 10204 3.1 or 3.2, with plate and welding records

Chemical Composition

Chemistry follows the plate specification for each grade. Values below are for Grade 1-1/4CR, made from ASTM A387 Grade 11 plate (heat analysis).

ElementComposition (%)
Carbon (C)0.05 – 0.17
Manganese (Mn)0.40 – 0.65
Phosphorus (P)0.025 max
Sulphur (S)0.025 max
Silicon (Si)0.50 – 0.80
Chromium (Cr)1.00 – 1.50
Molybdenum (Mo)0.45 – 0.65

Mechanical Properties

Tensile requirements of the pipe follow the plate used. For Grade 1-1/4CR (A387 Grade 11 plate):

PropertyValue
Tensile strength, plate Class 1415 – 585 MPa
Yield strength, plate Class 1240 MPa min
Tensile strength, plate Class 2515 – 690 MPa
Yield strength, plate Class 2310 MPa min
Elongation in 50 mm22% min

A transverse tension test across the weld and guided bend tests are also required by A691.

Equivalent Grades

A691 gradePlate specificationComparable seamless pipe
CM-65 / CM-70 / CM-75A204 Grade A / B / CA335 P1 (C-Mo)
CMSH-70 / CMSH-80A537 Class 1 / Class 2Not applicable
CMS-75A299Not applicable
1/2CRA387 Grade 2A335 P2
1CRA387 Grade 12A335 P12
1-1/4CRA387 Grade 11A335 P11
2-1/4CRA387 Grade 22A335 P22
3CRA387 Grade 21A335 P21
5CRA387 Grade 5A335 P5
9CRA387 Grade 9A335 P9
91A387 Grade 91A335 P91

Testing and Inspection

Testing depends on the class ordered. Higher classes add radiography of the full weld length and a hydrostatic test.

  • Transverse weld tension test and guided bend tests
  • Radiographic examination of the weld seam to ASME Section VIII for classes X1 and X3
  • Hydrostatic test for classes X2 and X3
  • Post-weld heat treatment records and hardness checks on chromium-molybdenum grades
  • Positive material identification (PMI) of plate and weld
  • Dimensional, visual and third-party inspection on request

Why Choose Riyaarth Overseas

Riyaarth Overseas works with qualified EFW pipe makers and plate mills to supply ASTM A691 pipe to project schedules. We help confirm the right grade and class against your piping specification and provide plate certificates, weld procedure records and EN 10204 3.1 documentation. Pipes are packed and marked for export, with bevel protectors where required, and we return quotations quickly.

Applications

Power plantsMain steam, hot reheat and cold reheat lines in large diameters made from 2-1/4CR and 91 grades.
RefineriesLarge hydrogen and hydroprocessing lines and transfer lines in chromium-molybdenum grades.
Petrochemical complexesFurnace outlet headers and hot process manifolds that exceed seamless size ranges.
Fertiliser plantsHigh-temperature, high-pressure synthesis gas and steam piping.
Heat recovery steam generatorsLarge headers and connecting pipe on the high-pressure side.
Pressure equipment fabricationShells, nozzles and spool pieces where welded pipe from plate is accepted by the design code.

Frequently asked questions

What does the class number mean in ASTM A691?

The first digit gives the heat treatment and the second digit gives the testing: 0 for none, 1 for radiography, 2 for pressure test and 3 for both. For example, Class 22 is heat treated with a pressure test.

What is the minimum size for ASTM A691 pipe?

ASTM A691 covers pipe of 16 in. (406 mm) outside diameter and larger, with wall thickness up to 3 in. (75 mm).

What is the difference between A691 and A335?

A335 is seamless alloy steel pipe. A691 is electric-fusion-welded from plate and is used for larger diameters and heavier walls where seamless pipe is not practical.

Which plate is used for A691 Grade 2-1/4CR?

Grade 2-1/4CR is formed from ASTM A387 Grade 22 plate, and its chemistry and tensile values follow that plate specification.