
Copper Nickel 70/30 Pipes & Tubes
Copper Nickel 70/30 (UNS C71500, CuNi30Mn1Fe) pipes and tubes to ASTM B466 and B111 for condensers and high-velocity seawater, from Riyaarth Overseas.

Copper Nickel 70/30 contains about 30 percent nickel with small additions of iron and manganese, designated UNS C71500, CW354H and CuNi30Mn1Fe. The higher nickel content gives greater strength and better resistance to erosion and impingement than 90/10, so 70/30 is chosen for higher seawater velocities and more demanding condenser duties.
Seamless pipe and tube are produced to ASTM B466 / ASME SB466 and condenser and heat exchanger tubes to ASTM B111 / ASME SB111, with EN 12451 used for European projects. The alloy also performs well in polluted water and in steam condensate where ammonia is present.
Riyaarth Overseas supplies and exports Copper Nickel 70/30 pipes and tubes to naval, power, desalination and chemical plant buyers.
For heat exchanger retubing, 70/30 tubes are often specified at the hottest or most turbulent passes while 90/10 is used for the rest of the system. As with all copper nickel alloys, new systems should be commissioned with clean, aerated seawater so that the protective film forms, and long exposure to sulphide-polluted water should be avoided during the first weeks of service. When enquiring, please give the standard, temper, OD, wall, length and whether tubes are needed straight or U-bent.
Key Features
Higher erosion resistance: 70/30 tolerates higher seawater velocities and turbulence than 90/10, making it suitable for tube inlet ends and high-flow condensers.
Higher strength: Higher nickel gives higher tensile and yield strength than 90/10, allowing thinner walls or higher pressures.
Resistance to ammonia stress corrosion: Unlike brasses, 70/30 copper nickel resists ammonia-induced stress corrosion cracking in steam condensers and feedwater heaters.
Good weldability and formability: It can be welded, brazed, expanded and U-bent using normal copper alloy practice.
Specifications
| Parameter | Details |
|---|---|
| Standards | ASTM B466 / ASME SB466, ASTM B111 / ASME SB111, ASTM B467 (welded pipe), EN 12451 |
| Grade / UNS | Copper Nickel 70/30, UNS C71500, CW354H, CuNi30Mn1Fe |
| Outside diameter range | Tube from 6.35 mm (1/4 in) OD; pipe sizes on enquiry |
| Wall thickness / schedule | SCH 10, 40, 80; tube wall in BWG or mm |
| Length | Random, fixed and cut lengths |
| Type | Seamless, welded |
| Ends | Plain ends, bevelled ends |
| Form / finish | Round, U-bent; annealed or drawn and stress relieved |
| Test certificate | EN 10204 3.1 mill test certificate as standard; EN 10204 3.2 with third-party inspection on request |
Chemical Composition
| Element | Composition (%) |
|---|---|
| Copper (Cu) | Remainder |
| Nickel (Ni, incl. Co) | 29.0 – 33.0 |
| Iron (Fe) | 0.40 – 1.0 |
| Manganese (Mn) | 1.0 max |
| Zinc (Zn) | 1.0 max |
| Lead (Pb) | 0.05 max |
Limits as in ASTM B466 and B111. Tighter limits on zinc, lead and carbon apply when tube is ordered for welding.
Mechanical Properties
| Property | Value |
|---|---|
| Tensile strength (ASTM B111, annealed O61) | 52 ksi (360 MPa) min |
| Yield strength (ASTM B111, annealed O61) | 18 ksi (125 MPa) min |
| Density | 8.95 g/cm³ |
| Melting range | 1170 – 1240 °C |
Equivalent Grades
| Standard | Designation |
|---|---|
| UNS | C71500 |
| EN | CW354H, CuNi30Mn1Fe |
| DIN | 2.0882 |
| JIS | C7150 |
| BS (former) | CN107 |
Testing and Inspection
Copper Nickel 70/30 pipes and tubes are tested to the ordered ASTM or EN standard. Typical checks include:
- Eddy current test: Non-destructive testing of each tube.
- Hydrostatic or pneumatic test: As required by the specification.
- Expansion and flattening tests: Ductility checks on samples from each lot.
- Chemical analysis: Confirms nickel, iron and manganese levels.
- Dimensional and visual inspection: OD, wall, length and surface.
- Third-party inspection: Witness inspection on request.
Why Choose Riyaarth Overseas
Riyaarth Overseas supplies Copper Nickel 70/30 pipes and tubes from ready stock and from established copper alloy tube mills, in straight lengths, U-bends and cut lengths to suit your bundle or piping layout. Every delivery carries EN 10204 3.1 mill test certificates with heat or lot numbers marked on the tubes.
We can also supply tube plates, fittings and flanges in 70/30 to match. Material is packed for export in wooden boxes with end caps, and we send prompt quotations against your tube sheets, bills of materials or specifications.
Applications






Frequently asked questions
What is the difference between 90/10 and 70/30 copper nickel?
70/30 contains about 30 percent nickel against 10 percent in 90/10. It is stronger and tolerates higher velocities, while 90/10 costs less, conducts heat better and is preferred for general seawater piping.
Is 70/30 copper nickel magnetic?
No. 70/30 copper nickel is essentially non-magnetic in normal commercial compositions.
Which standard covers 70/30 condenser tubes?
Condenser and heat exchanger tubes in C71500 are normally ordered to ASTM B111 / ASME SB111. Seamless pipe is ordered to ASTM B466.
Can 70/30 copper nickel be welded to steel?
Yes, using nickel or nickel-copper filler metals and suitable procedures, which is common at flanges and tube sheet joints.
