Request Quote
  1. Home
  2. Products
  3. Copper and Brass
  4. Copper Nickel 90/10 Pipes & Tubes

Copper Nickel 90/10 Pipes & Tubes

Copper Nickel 90/10 (UNS C70600, CuNi10Fe1Mn) pipes and tubes to ASTM B466, B111, EEMUA 144 and EN 12451 for seawater systems, from Riyaarth Overseas.

Copper Nickel 90/10 Pipes & Tubes by Riyaarth Overseas

Copper Nickel 90/10 is a copper alloy with about 10 percent nickel and controlled additions of iron and manganese, designated UNS C70600, CW352H and CuNi10Fe1Mn. It is the standard material for seawater piping because it combines good corrosion resistance in flowing seawater with natural resistance to biofouling, good thermal conductivity and easy fabrication.

The iron content, held between 1.0 and 1.8 percent, is important: it helps form a thin, adherent protective film that gives the alloy its resistance to erosion and impingement attack. 90/10 pipes and tubes are produced to several international standards, so buyers can match naval, offshore or power plant specifications.

Riyaarth Overseas supplies and exports Copper Nickel 90/10 pipes and tubes in seamless and welded form for shipbuilding, offshore, desalination and power generation projects.

Key Features

Seawater corrosion resistance: In clean, flowing seawater 90/10 develops a protective surface film within weeks and then corrodes at very low rates over a long service life.

Biofouling resistance: Copper ions released at the surface discourage marine growth such as barnacles and mussels, which keeps pipe bores and intake screens cleaner.

Good thermal conductivity: Its conductivity is higher than that of 70/30 copper nickel and stainless steel, which suits condenser and cooler tubing.

Easy fabrication: 90/10 bends, flares, brazes and welds readily, which helps with on-board and on-site pipe installation.

Specifications

ParameterDetails
StandardsASTM B466 / ASME SB466 (seamless pipe and tube), ASTM B111 / ASME SB111 (condenser tubes), ASTM B467 (welded pipe), EEMUA 144, EN 12451, DIN 86019
Grade / UNSCopper Nickel 90/10, UNS C70600, CW352H, CuNi10Fe1Mn
Outside diameter rangeTube from 6.35 mm (1/4 in) OD; EEMUA 144 pipe sizes; larger diameters in welded form
Wall thickness / scheduleSCH 10, 40, 80; EEMUA 144 pressure classes (for example 16 bar and 20 bar); tube wall in BWG or mm
LengthRandom, fixed and cut lengths
TypeSeamless, welded
EndsPlain ends, bevelled ends
Form / finishRound, U-bent, coiled; annealed or light drawn
Test certificateEN 10204 3.1 mill test certificate as standard; EN 10204 3.2 with third-party inspection on request

Chemical Composition

ElementComposition (%)
Copper (Cu)Remainder
Nickel (Ni, incl. Co)9.0 – 11.0
Iron (Fe)1.0 – 1.8
Manganese (Mn)1.0 max
Zinc (Zn)1.0 max
Lead (Pb)0.05 max

Limits as in ASTM B466 and B111. Stricter limits for zinc, lead, carbon, sulphur and phosphorus apply when tube is ordered for welding.

Mechanical Properties

PropertyValue
Tensile strength (ASTM B111, annealed O61)40 ksi (275 MPa) min
Yield strength (ASTM B111, annealed O61)15 ksi (105 MPa) min
Tensile strength (ASTM B466, annealed)38 ksi (260 MPa) min
Yield strength (ASTM B466, annealed)13 ksi (90 MPa) min
Density8.94 g/cm³
Melting range1100 – 1145 °C

Equivalent Grades

StandardDesignation
UNSC70600
ENCW352H, CuNi10Fe1Mn
DIN2.0872
JISC7060
BS (former)CN102

Testing and Inspection

Copper Nickel 90/10 pipes and tubes are inspected to the ordered ASTM, EEMUA or EN standard. Typical checks include:

  • Eddy current test: Non-destructive testing of each tube for wall defects.
  • Hydrostatic or pneumatic test: As permitted or required by the specification.
  • Expansion and flattening tests: Ductility checks on samples from each lot.
  • Chemical analysis: Including iron and manganese, which control seawater performance.
  • Dimensional and visual inspection: OD, wall, length and bore cleanliness.
  • Third-party inspection: Witness inspection by class societies or agencies on request.

Why Choose Riyaarth Overseas

Riyaarth Overseas supplies Copper Nickel 90/10 pipes and tubes from ready stock and from established copper alloy tube mills, in straight lengths, U-bends and cut lengths to suit your bundle or piping layout. Every delivery carries EN 10204 3.1 mill test certificates with heat or lot numbers marked on the tubes.

Matching fittings and flanges in 90/10 can be offered with the pipe to simplify your order. Material is packed for export in wooden boxes with end caps, and we send prompt quotations against your tube sheets, bills of materials or specifications.

Applications

ShipbuildingSeawater cooling, fire main, ballast and sanitary piping on naval and merchant ships.
Offshore oil and gasFire water ring mains, seawater lift and cooling water systems on platforms and FPSOs.
Power generationCondenser and cooler tubes in seawater-cooled power stations.
DesalinationBrine heater and heat recovery tubing in multi-stage flash plants.
Aquaculture and seawater intakesIntake screens and pipework where resistance to biofouling reduces cleaning.
Hydraulic and brake linesSmall-diameter tube for vehicle brake lines and marine hydraulic systems.

Frequently asked questions

Which standards are used for 90/10 copper nickel pipe?

Common standards are ASTM B466 for seamless pipe and tube, ASTM B111 for condenser tubes, ASTM B467 for welded pipe, EEMUA 144 for offshore piping and EN 12451 for seamless tubes.

Why is 90/10 copper nickel used for seawater piping?

It resists corrosion in flowing seawater, resists biofouling, is easy to fabricate and has a long record of use in ships and offshore installations.

What flow velocity is suitable for 90/10 pipe?

Design guides commonly limit seawater velocity in 90/10 pipe to about 3.5 m/s for larger pipe sizes and lower values for small bores, to avoid erosion. The project design code should be followed.

How should new 90/10 piping be commissioned?

It should first be filled with clean, aerated seawater so the protective surface film can form, and long stagnation with polluted or sulphide-bearing water should be avoided in the first weeks.