Request Quote
  1. Home
  2. Products
  3. Inconel
  4. Inconel Seamless Pipes & Tubes

Inconel Seamless Pipes & Tubes

Inconel 600, 601, 625 and 690 seamless pipes and tubes to ASTM B167, B444 and B163 for heat, corrosion and pressure duty, supplied by Riyaarth Overseas.

Inconel Seamless Pipes & Tubes by Riyaarth Overseas

Inconel seamless pipes and tubes are nickel-chromium alloy products made without a weld seam, for service where heat, corrosion and pressure act together. The main grades are Inconel 600 (UNS N06600), 601 (N06601) and 690 (N06690), made to ASTM B167, and Inconel 625 (N06625), made to ASTM B444. Heat exchanger and condenser tubes in these alloys are also ordered to ASTM B163 and B704 depending on grade and type.

A seamless tube has uniform wall and properties around its full circumference, which is why engineers specify it for high-pressure lines, furnace parts and heat exchanger bundles where a weld would be the weak point. Riyaarth Overseas supplies and exports Inconel seamless pipes and tubes in hot-finished and cold-worked conditions, cut to length or U-bent, with complete mill documentation.

Key Features

No weld seam: Seamless construction removes the weld as a possible site for corrosion or creep damage and simplifies inspection.

Heat and oxidation resistance: High nickel and chromium contents give strong resistance to oxidation and scaling, with 601 adding aluminium for cyclic oxidation.

Corrosion resistance: Inconel 600 resists chloride stress corrosion cracking, while 625 adds molybdenum and niobium for pitting and crevice resistance.

Strength across temperatures: The alloys keep good strength from cryogenic temperatures to well above the limits of stainless steels.

Specifications

ParameterDetails
StandardsASTM B167 / ASME SB167 (600, 601, 690), ASTM B444 / SB444 (625), ASTM B163 / SB163 (heat exchanger tubes)
Grades / UNS600 (N06600), 601 (N06601), 625 (N06625), 690 (N06690)
Outside diameter rangeSmall-bore tube to NPS pipe sizes, as per enquiry
Wall thickness / scheduleSCH 5S, 10S, 40S, 80S, 160, XXS or tube gauge
LengthRandom, fixed, cut lengths and U-bent tubes
TypeSeamless, hot-finished or cold-worked
ConditionAnnealed; 625 Grade 1 annealed or Grade 2 solution annealed
EndsPlain end, bevelled end
Form / finishRound pipe and tube; bright annealed, pickled or polished
Test certificateEN 10204 3.1 or 3.2

Choosing the grade depends on the service. Inconel 600 is a general purpose heat and corrosion resisting alloy, 601 is for oxidising furnace atmospheres, 625 is for strength with pitting and crevice resistance, and 690 is for high-temperature water and oxidising acids.

Chemical Composition

ElementInconel 600 (%)Inconel 625 (%)Inconel 690 (%)
Nickel (Ni)72.0 min58.0 min58.0 min
Chromium (Cr)14.0 – 17.020.0 – 23.027.0 – 31.0
Iron (Fe)6.0 – 10.05.0 max7.0 – 11.0
Molybdenum (Mo)n/a8.0 – 10.0n/a
Niobium + Tantalumn/a3.15 – 4.15n/a
Carbon (C)0.15 max0.10 max0.05 max
Manganese (Mn)1.0 max0.50 max0.50 max
Silicon (Si)0.50 max0.50 max0.50 max
Sulphur (S)0.015 max0.015 max0.015 max

Inconel 601 composition is given on its own page.

Mechanical Properties

Property, minInconel 600 (B167, CW annealed)Inconel 625 (B444, Grade 1)Inconel 690 (B167, CW annealed)
Tensile strength550 MPa (80 ksi)827 MPa (120 ksi)586 MPa (85 ksi)
Yield strength (0.2%)240 MPa (35 ksi)414 MPa (60 ksi)205 MPa (30 ksi)
Elongation30%30%35%
Density8.47 g/cm³8.44 g/cm³8.19 g/cm³

Equivalent Grades

GradeUNSWerkstoff Nr.
Inconel 600N066002.4816
Inconel 601N066012.4851
Inconel 625N066252.4856
Inconel 690N066902.4642

Inconel is a trade name of Special Metals; the same alloys are also sold as Alloy 600, 601, 625 and 690 by other mills.

Testing and Inspection

Each seamless pipe and tube is tested to its ASTM standard, and extra tests can be added to the order.

  • Chemical analysis and tensile testing
  • Hydrostatic test or eddy current test on every length
  • Ultrasonic testing for critical service
  • Flattening and flaring tests
  • Intergranular corrosion tests where specified
  • Positive material identification (PMI) and third-party inspection

Why Choose Riyaarth Overseas

Riyaarth Overseas supplies Inconel seamless pipes and tubes from established nickel alloy mills, in stock sizes and mill-order lengths. We arrange cut lengths, U-bending and EN 10204 3.1 or 3.2 certification, and pack in wooden cases for export. Send your grade, size and quantity for a prompt quotation.

Applications

Chemical processingHeat exchanger tubes, reactor coils and transfer lines handling hot corrosive media.
Furnaces and heat treatmentRadiant tubes, retorts and muffles in 600 and 601.
Nuclear powerSteam generator tubing in Inconel 690 and instrument lines in 600.
Oil and gasInconel 625 control lines, umbilical tubes and sour service piping.
Marine and offshoreSeawater-cooled exchangers and exhaust systems in 625.
AerospaceDucting and exhaust tubing where heat and fatigue resistance are needed.

Frequently asked questions

Which ASTM standard covers Inconel seamless pipe?

ASTM B167 covers Inconel 600, 601 and 690 seamless pipe and tube. ASTM B444 covers Inconel 625 seamless pipe and tube.

Why choose seamless over welded Inconel pipe?

Seamless pipe has no weld seam, so properties are uniform around the wall. It is preferred for high pressure, cyclic and critical service.

Which Inconel grade is best for high-temperature oxidation?

Inconel 601 is designed for oxidation resistance, helped by its aluminium content. Inconel 600 is also widely used in furnaces.

Can Inconel tubes be supplied U-bent?

Yes. Heat exchanger tubes can be supplied U-bent to drawing, with stress relief of the bends where specified.