Request Quote
  1. Home
  2. Products
  3. Inconel
  4. Inconel Welded Pipes & Tubes

Inconel Welded Pipes & Tubes

Inconel 600 and 625 welded pipes and tubes to ASTM B516, B517, B704 and B705 for corrosion and heat duty in larger sizes, supplied by Riyaarth Overseas.

Inconel Welded Pipes & Tubes by Riyaarth Overseas

Inconel welded pipes and tubes are formed from nickel-chromium alloy strip or plate and joined with a longitudinal weld, then heat treated and tested. Inconel 600 welded tube is made to ASTM B516 and welded pipe to ASTM B517. Inconel 625 welded tube is made to ASTM B704 and welded pipe to ASTM B705. In thin walls and larger diameters, welded products are usually more economical and more readily available than seamless.

Modern welded nickel alloy tube is fully annealed after welding and tested by eddy current or hydrostatic test, so it is accepted for many heat exchanger, process and exhaust applications. Riyaarth Overseas supplies and exports Inconel welded pipes and tubes in standard schedules and tube gauges, and can arrange larger diameters fabricated from plate.

Key Features

Cost-effective in thin walls: Welded construction uses strip, which keeps cost down for light-wall tube and large-diameter pipe.

Close wall tolerance: Strip has an even thickness, so welded tube has a consistent wall and concentricity.

Annealed after welding: Heat treatment after welding restores ductility and corrosion resistance in the weld zone.

Wide size range: Welded products cover large outside diameters that are difficult to produce seamless.

Specifications

ParameterDetails
StandardsASTM B516 (600 welded tube), B517 (600 welded pipe), B704 (625 welded tube), B705 (625 welded pipe); ASME SB equivalents
Grades / UNSInconel 600 (N06600), Inconel 625 (N06625)
Outside diameter rangeTube sizes to large-diameter pipe, as per enquiry
Wall thickness / scheduleSCH 5S, 10S, 40S, 80S or tube gauge
LengthRandom, fixed and cut lengths
TypeWelded (TIG or plasma), EFW for large sizes
ConditionAnnealed after welding; 625 Grade 1 annealed or Grade 2 solution annealed
EndsPlain end, bevelled end
Form / finishRound pipe and tube, pickled or bright annealed, weld bead conditioned
Test certificateEN 10204 3.1 or 3.2

Welded tube is commonly chosen for heat exchangers with thin walls, while welded pipe in standard schedules suits process lines, ducting and exhaust systems. For very large diameters, pipe can be rolled and welded from Inconel plate. State the standard, grade, size, schedule or gauge, length and any extra tests such as radiography when you send an enquiry, so the correct product form is quoted.

Chemical Composition

ElementInconel 600 (%)Inconel 625 (%)
Nickel (Ni)72.0 min58.0 min
Chromium (Cr)14.0 – 17.020.0 – 23.0
Iron (Fe)6.0 – 10.05.0 max
Molybdenum (Mo)n/a8.0 – 10.0
Niobium + Tantalumn/a3.15 – 4.15
Carbon (C)0.15 max0.10 max
Manganese (Mn)1.0 max0.50 max
Silicon (Si)0.50 max0.50 max
Sulphur (S)0.015 max0.015 max
Aluminium (Al)n/a0.40 max
Titanium (Ti)n/a0.40 max

Mechanical Properties

Property, minInconel 600 (annealed)Inconel 625 Grade 1 (annealed)Inconel 625 Grade 2 (solution annealed)
Tensile strength550 MPa (80 ksi)827 MPa (120 ksi)690 MPa (100 ksi)
Yield strength (0.2%)240 MPa (35 ksi)414 MPa (60 ksi)276 MPa (40 ksi)
Elongation30%30%30%

Grade 2 Inconel 625 is used where creep strength above about 595 °C is required; Grade 1 is used for corrosion service at lower temperatures.

Equivalent Grades

GradeUNSWerkstoff Nr.
Inconel 600N066002.4816
Inconel 625N066252.4856

Testing and Inspection

Welded pipes and tubes are tested to the ASTM standard ordered, with weld-focused checks.

  • Eddy current or hydrostatic test on every length
  • Radiography of the weld seam where specified
  • Flattening, flange and reverse bend tests on the weld
  • Chemical analysis and tensile testing
  • Positive material identification (PMI)
  • Dimensional, visual and third-party inspection

Why Choose Riyaarth Overseas

Riyaarth Overseas supplies Inconel welded pipes and tubes from qualified mills that anneal and test after welding. We provide EN 10204 3.1 certificates with weld and heat details, cut lengths on request and export packing in wooden cases. Our team replies quickly with prices and delivery for stock and mill-order items.

Applications

Heat exchangersWelded tube bundles for chemical and petrochemical exchangers.
Flue gas desulphurisationInconel 625 ducts and lines in scrubbers handling acidic condensate.
Exhaust systemsMarine and power generation exhaust piping in 625.
Chemical processingLarge-diameter process lines in Inconel 600 for hot caustic and chloride duty.
Pulp and paperBleach plant piping and equipment exposed to chlorine compounds.
Pollution controlWaste incineration and stack liners where heat and corrosion combine.

Frequently asked questions

Which standards cover Inconel 600 welded pipe and tube?

ASTM B517 covers Inconel 600 welded pipe and ASTM B516 covers Inconel 600 welded tube.

Which standards cover Inconel 625 welded products?

ASTM B705 covers Inconel 625 welded pipe and ASTM B704 covers Inconel 625 welded tube.

Is welded Inconel pipe as good as seamless?

For many services yes, since the tube is annealed and tested after welding. For the highest pressure or critical cyclic duty, seamless is often specified.

What is the difference between 625 Grade 1 and Grade 2?

Grade 1 is annealed and has higher room temperature strength. Grade 2 is solution annealed for better creep strength at high temperature.