Request Quote
  1. Home
  2. Products
  3. Monel
  4. Nickel 200 Pipes & Tubes

Nickel 200 Pipes & Tubes

Nickel 200 (UNS N02200) commercially pure nickel pipes and tubes to ASTM B161, B163 and B725 for caustic soda and food duty, supplied by Riyaarth Overseas.

Nickel 200 Pipes & Tubes by Riyaarth Overseas

Nickel 200 pipes and tubes are made from commercially pure wrought nickel, UNS N02200 (Werkstoff 2.4066), with a nickel content of 99.0% minimum. The alloy is known for outstanding resistance to caustic alkalis, good resistance to neutral and reducing environments, high thermal and electrical conductivity and good ductility. Seamless pipe and tube are produced to ASTM B161, condenser and heat exchanger tubes to ASTM B163, and welded pipe and tube to ASTM B725 and B730.

Nickel 200 is a standard material for caustic soda evaporators, food processing equipment and synthetic fibre plants. It is used for service up to 315 °C (600 °F); above that temperature, carbon in the alloy can precipitate as graphite at grain boundaries, so the low-carbon Nickel 201 is used instead. Riyaarth Overseas supplies and exports Nickel 200 pipes and tubes from approved mills with full documentation.

Key Features

Caustic resistance: Nickel 200 is one of the best metals for handling sodium hydroxide and other caustic alkalis across a wide range of concentrations and temperatures.

Product purity: Very low corrosion rates keep the process stream free of metal pick-up, which matters in food, pharmaceutical and synthetic fibre production.

High conductivity: Thermal and electrical conductivity are high compared with nickel alloys, useful for heat transfer tubes and electrical parts.

Ductility and fabrication: The annealed alloy forms, bends and flares easily and is readily welded with matching nickel filler metal.

Specifications

ParameterDetails
StandardsASTM B161 / ASME SB161 (seamless pipe and tube), B163 (heat exchanger tube), B725 (welded pipe), B730 (welded tube)
Grade / UNSNickel 200 / UNS N02200
Outside diameter rangeSmall-bore tube to NPS pipe sizes, as per enquiry
Wall thickness / scheduleSCH 5S, 10S, 40S, 80S, 160 and heavier, or as per tube gauge
LengthRandom, fixed and cut lengths; U-bent tubes on request
TypeSeamless, welded
ConditionAnnealed or stress relieved
EndsPlain end, bevelled end
Form / finishRound pipe and tube, bright annealed or pickled
Test certificateEN 10204 3.1 or 3.2

For heat exchanger bundles, Nickel 200 tubes are usually ordered to ASTM B163 in the annealed condition, which allows rolling into tube sheets and U-bending. For process piping, ASTM B161 pipe in standard schedules is common. Welded pipe and tube to ASTM B725 and B730 is a lower cost option in thin walls and larger sizes.

Check the operating temperature before choosing Nickel 200. If any part of the line or exchanger will run above 315 °C for long periods, specify Nickel 201 instead to avoid graphitisation.

Chemical Composition

ElementComposition (%)
Nickel (Ni)99.0 min
Copper (Cu)0.25 max
Iron (Fe)0.40 max
Manganese (Mn)0.35 max
Carbon (C)0.15 max
Silicon (Si)0.35 max
Sulphur (S)0.01 max

Mechanical Properties

Property (ASTM B161)Annealed, up to 5 in. ODStress relieved
Tensile strength, min380 MPa (55 ksi)450 MPa (65 ksi)
Yield strength (0.2%), min105 MPa (15 ksi)275 MPa (40 ksi)
Elongation, min35%15%
Physical propertyValue
Density8.89 g/cm³
Melting range1435 – 1446 °C

Equivalent Grades

Standard / systemDesignation
UNSN02200
Werkstoff Nr.2.4066
DINNi 99.2
JISNW2200

Testing and Inspection

Pipes and tubes are tested to the ASTM product standard and the purchase order.

  • Chemical analysis and tensile testing
  • Hydrostatic test or eddy current test on every length
  • Flattening and flaring tests
  • Positive material identification (PMI)
  • Dimensional and visual inspection
  • Third-party inspection on request

Why Choose Riyaarth Overseas

Riyaarth Overseas supplies Nickel 200 pipes and tubes from established nickel alloy mills and stock, cut to the lengths you need. Each delivery carries EN 10204 3.1 certificates, and we pack in wooden cases with end caps to protect the surface during export. Send your sizes and quantities for a fast quotation.

Applications

Caustic soda productionEvaporator tubes and piping in plants that concentrate sodium hydroxide.
Food processingProcess lines and heat exchanger tubes where product purity must be kept.
Synthetic fibresEquipment handling chemicals in viscose and other fibre production.
Chemical processingPiping for dry chlorine, hydrogen chloride and neutral salt solutions at moderate temperature.
Electronics and electricalTubing for leads, battery and electronic components that need conductivity.
PharmaceuticalsReactor lines and transfer piping where contamination must be avoided.

Frequently asked questions

What is Nickel 200 used for?

It is used mainly for caustic soda handling, food processing equipment, synthetic fibre plants and electronic parts that need pure nickel.

What is the maximum service temperature of Nickel 200?

Nickel 200 is limited to about 315 °C (600 °F). Above this, graphitisation can embrittle the metal, so Nickel 201 is used.

Which ASTM standard covers Nickel 200 seamless pipe?

ASTM B161 covers seamless pipe and tube, and ASTM B163 covers seamless condenser and heat exchanger tubes.

Is Nickel 200 magnetic?

Yes. Nickel 200 is ferromagnetic at room temperature, which can be used as a simple check when sorting material.