Request Quote
  1. Home
  2. Products
  3. Monel
  4. Nickel 201 Pipes & Tubes

Nickel 201 Pipes & Tubes

Nickel 201 (UNS N02201) low-carbon pure nickel pipes and tubes to ASTM B161 and B163 for service above 315 °C, supplied and exported by Riyaarth Overseas.

Nickel 201 Pipes & Tubes by Riyaarth Overseas

Nickel 201 pipes and tubes are made from low-carbon commercially pure nickel, UNS N02201 (Werkstoff 2.4068), with carbon limited to 0.02% maximum. Apart from carbon, its chemistry matches Nickel 200, so it offers the same resistance to caustic alkalis and reducing media. The low carbon prevents graphite from forming at grain boundaries during long exposure at elevated temperature.

That makes Nickel 201 the correct choice for service above 315 °C (600 °F), such as hot caustic evaporators and high-temperature chemical equipment. The lower carbon also gives a lower annealed hardness and work-hardening rate, which helps in spinning, cold forming and flaring. Riyaarth Overseas supplies and exports Nickel 201 seamless and welded pipes and tubes to ASTM B161, B163, B725 and B730.

Key Features

Safe at higher temperature: Carbon of 0.02% max avoids graphitisation, so the alloy keeps its ductility in service above 315 °C.

Caustic and alkali resistance: Like Nickel 200, it resists sodium and potassium hydroxide, including hot and concentrated solutions.

Easy cold forming: Lower hardness and slower work hardening make tube bending, expanding and flaring straightforward.

Weldable: The alloy welds with standard nickel filler metals and keeps its corrosion resistance in the weld zone.

Specifications

ParameterDetails
StandardsASTM B161 / ASME SB161, B163 / SB163, B725, B730
Grade / UNSNickel 201 / UNS N02201
Outside diameter rangeInstrument tube to NPS pipe sizes, as per enquiry
Wall thickness / scheduleSCH 5S to SCH 160, XXS, or tube gauge as required
LengthRandom, fixed, cut lengths and U-bends
TypeSeamless, welded
ConditionAnnealed or stress relieved
EndsPlain end, bevelled end
Form / finishRound pipe and tube, bright annealed or pickled
Test certificateEN 10204 3.1 or 3.2

Nickel 201 is usually ordered in the annealed condition for heat exchanger tube and formed parts, and in the stress-relieved condition where a higher yield strength is useful in straight runs. Seamless pipe is made to ASTM B161, heat exchanger and condenser tube to ASTM B163, and welded pipe and tube to ASTM B725 and B730.

Many caustic soda plants use Nickel 201 in the hottest evaporator stages and Nickel 200 in the cooler sections, so it is worth checking the temperature profile along the line before ordering. Because the two grades differ only in carbon, the same welding filler metals and fabrication methods apply to both.

Nickel 201 is also preferred for parts that are cold formed heavily, such as spun shapes and flared fittings, because its lower hardness reduces the risk of cracking during forming.

Chemical Composition

ElementComposition (%)
Nickel (Ni)99.0 min
Copper (Cu)0.25 max
Iron (Fe)0.40 max
Manganese (Mn)0.35 max
Carbon (C)0.02 max
Silicon (Si)0.35 max
Sulphur (S)0.01 max

Mechanical Properties

Property (ASTM B161)Annealed, up to 5 in. ODStress relieved
Tensile strength, min345 MPa (50 ksi)415 MPa (60 ksi)
Yield strength (0.2%), min80 MPa (12 ksi)205 MPa (30 ksi)
Elongation, min35%15%
Physical propertyValue
Density8.89 g/cm³
Melting range1435 – 1446 °C

Equivalent Grades

Standard / systemDesignation
UNSN02201
Werkstoff Nr.2.4068 (also 2.4061)
DINLC-Ni 99
JISNW2201

Testing and Inspection

Testing follows the ASTM standard ordered, with extra checks available on request.

  • Chemical analysis with confirmation of carbon content
  • Tensile, flattening and flaring tests
  • Hydrostatic or eddy current test on each length
  • Positive material identification (PMI)
  • Dimensional and surface inspection
  • Third-party inspection on request

Why Choose Riyaarth Overseas

Riyaarth Overseas sources Nickel 201 pipes and tubes from reliable nickel alloy producers and supplies them cut to length with EN 10204 3.1 certificates. Material is packed in wooden cases with protected ends for export, and we quote quickly for both stock and mill-order sizes.

Applications

Caustic evaporatorsTubes and piping in high-temperature stages of caustic soda concentration.
Chemical processingEquipment for hot alkalis, chlorination and fluorination processes.
Heat exchangersCondenser and exchanger tubes to ASTM B163 for hot alkaline duty.
Electrical and electronicTubing and parts that are formed cold and then used at elevated temperature.
Plating industryLines and heating coils in nickel plating and alkaline cleaning tanks.
Aerospace and laboratorySpun and formed tubular parts that need pure nickel with good formability.

Frequently asked questions

What is the difference between Nickel 200 and Nickel 201?

Nickel 201 has carbon limited to 0.02% max against 0.15% max for Nickel 200. This makes Nickel 201 suitable for service above 315 °C.

Why is Nickel 201 used above 315 °C?

At these temperatures carbon in Nickel 200 can form graphite at grain boundaries and embrittle the metal. The low carbon in Nickel 201 prevents this.

Is Nickel 201 weaker than Nickel 200?

Its minimum tensile and yield values in ASTM B161 are slightly lower, but its corrosion resistance is the same and it is easier to cold form.

Can Nickel 201 tubes be supplied U-bent?

Yes. Nickel 201 heat exchanger tubes to ASTM B163 can be supplied straight or U-bent as per drawing.