Request Quote
  1. Home
  2. Products
  3. Stainless Steel
  4. UNS S32615 Stainless Steel Pipes & Tubes

UNS S32615 Stainless Steel Pipes & Tubes

UNS S32615 high silicon austenitic stainless steel pipes and tubes to ASTM A312 and A213, for concentrated sulphuric acid service, from Riyaarth Overseas.

UNS S32615 Stainless Steel Pipes & Tubes by Riyaarth Overseas

UNS S32615 is a high silicon austenitic stainless steel with about 5% silicon, 17.5% chromium, 19.5% nickel and 2% copper. It is sold as Alleima SX, formerly Sandvik SX. Although its UNS number sits in the range used by many duplex grades, S32615 is not a duplex steel: it has an austenitic structure. Its high silicon content forms a protective silicon-rich surface film in hot, concentrated sulphuric acid, where standard stainless steels corrode quickly.

Pipe is supplied to ASTM A312 and tube to ASTM A213, and the grade is accepted for ASME Section VIII Division 1 construction. Sulphuric acid plants use it for acid coolers, acid piping and distributors. Riyaarth Overseas supplies and exports S32615 pipes and tubes from mill sources for new plants and replacement work.

Key Features

Built for sulphuric acid: The 4.8 – 6.0% silicon content gives resistance to concentrated sulphuric acid in both static and flowing conditions.

Austenitic structure: S32615 is austenitic, so it is tough and readily formed and welded, unlike cast high silicon iron.

Copper addition: Copper of 1.50 – 2.50% adds resistance in reducing acid conditions.

Nitric acid service: The grade has also shown good results in highly concentrated nitric acid.

Specifications

ItemDetails
StandardsASTM A312 / ASME SA-312 (pipes), ASTM A213 / ASME SA-213 (tubes)
GradeUNS S32615
Outside diameterPipes and tubes to the order, subject to mill availability
Wall thickness / schedulePipes per ASME B36.19M schedules; tubes in average or minimum wall
LengthRandom lengths and cut lengths
TypeSeamless
EndsPlain ends, bevelled ends
Form / finishSolution annealed and pickled
Test certificateEN 10204 3.1 standard; EN 10204 3.2 with third-party witness on request

Chemical Composition

ElementComposition (%)
Carbon (C)0.07 max
Manganese (Mn)2.00 max
Phosphorus (P)0.045 max
Sulphur (S)0.030 max
Silicon (Si)4.8 – 6.0
Chromium (Cr)16.5 – 19.5
Nickel (Ni)19.0 – 22.0
Molybdenum (Mo)0.30 – 1.50
Copper (Cu)1.50 – 2.50

Mechanical Properties

Minimum values at room temperature, solution annealed.

PropertyValue
Tensile strength80 ksi (550 MPa) min
Yield strength (0.2% proof)32 ksi (220 MPa) min
Elongation in 2 in.25% min (manufacturer tube data)
Hardness90 HRB max (manufacturer tube data)
Density7.9 g/cm³

Equivalent Grades

SystemDesignation
UNSS32615
Trade nameAlleima SX (formerly Sandvik SX)
EN / WerkstoffNo established equivalent
JISNo established equivalent

Testing and Inspection

S32615 pipes and tubes are tested to ASTM A312 or A213 and the general requirements of ASTM A999 or A1016.

  • Hydrostatic or electric test: Every length is hydrostatically tested or tested by a non-destructive electric method.
  • Flattening and flaring: Flattening on pipe and flaring on tube, as the specification requires.
  • Grain size: ASTM A312 requires a grain size of No. 3 or finer for this grade.
  • PMI: Positive material identification with silicon confirmed by a suitable analyser.
  • Visual and dimensional: Checks on surface, outside diameter, wall and length.
  • Third-party inspection: Witness inspection by a nominated agency on request.

When ordering, state the product form (pipe to A312 or tube to A213), size, wall or schedule, length and quantity, together with the acid concentration and temperature if you want the mill to confirm suitability. S32615 can be welded with a matching high silicon filler metal and a qualified procedure. Equipment design should keep acid velocities and temperatures within the limits recommended by the material producer for concentrated sulphuric acid.

Why Choose Riyaarth Overseas

Riyaarth Overseas sources S32615 pipes and tubes from the producing mill and its stockists, which matters for a grade with limited global supply. Orders ship with EN 10204 3.1 mill test certificates, cut lengths can be arranged, and material is packed for export. Send your sizes for a quotation.

Applications

Sulphuric acid plantsUsed for acid piping that carries hot concentrated acid between towers, coolers and tanks.
Acid coolersTubes for shell and tube acid coolers where the acid side needs high silicon alloy.
Acid distributorsUsed for distributor pipes in drying and absorption towers.
Pumps and nozzlesUsed for pump parts, nozzles and internals in contact with concentrated acid.
Strainers and mesh padsUsed for strainers and mist eliminator supports inside acid towers.
Nitric acid handlingUsed where highly concentrated nitric acid would attack conventional stainless steels.

Frequently asked questions

Is UNS S32615 a duplex stainless steel?

No. Despite its UNS number, S32615 is a high silicon austenitic stainless steel. It is not a ferritic-austenitic duplex grade.

What is S32615 mainly used for?

It is used in concentrated sulphuric acid service, for acid coolers, acid piping, distributors and tower internals.

Is S32615 good in seawater or chlorides?

No. The grade is not designed for chlorides and can suffer pitting, crevice corrosion and stress corrosion cracking in chloride solutions, especially above about 60 °C.

Which ASTM standards cover S32615?

ASTM A312 covers pipe and ASTM A213 covers tube. The grade is also listed in A479 for bars.