
UNS S32950 Duplex Stainless Steel Pipes & Tubes
UNS S32950 duplex stainless steel pipes and tubes to ASTM A789 and A790, 26-29% chromium, for refinery and chemical service, from Riyaarth Overseas.

UNS S32950 is a ferritic-austenitic (duplex) stainless steel with 26 – 29% chromium, 3.5 – 5.2% nickel, 1.00 – 2.50% molybdenum and a nitrogen addition. It is widely known by the trade name 7-Mo PLUS. Its two-phase structure gives roughly twice the yield strength of 304L or 316L along with much better resistance to chloride stress corrosion cracking than standard austenitic grades.
Tubing is made to ASTM A789 and pipe to ASTM A790, with ASME SA-789 and SA-790 for code work. Engineers choose S32950 for refinery heat exchangers, overhead condensers and chemical service where chlorides and moderate temperatures would crack austenitic tubes. Riyaarth Overseas supplies and exports S32950 pipes and tubes from mill sources with full documentation.
Key Features
High chromium duplex: With 26 – 29% chromium, S32950 has more chromium than 2205 type grades, which supports its general corrosion resistance in oxidising media.
Stress corrosion cracking resistance: The duplex structure resists chloride stress corrosion cracking far better than 300 series austenitic stainless steels.
High strength: A minimum yield of 70 ksi (480 MPa) allows thinner walls than austenitic tube for the same pressure rating.
Controlled heat treatment: ASTM A789 sets a narrow annealing range of 990 – 1025 °C with air cooling for this grade, which secures the correct phase balance.
Specifications
| Item | Details |
|---|---|
| Standards | ASTM A789 / ASME SA-789 (tubes), ASTM A790 / ASME SA-790 (pipes) |
| Grade | UNS S32950 |
| Outside diameter | Tubes and pipes in sizes to the order, subject to mill availability |
| Wall thickness / schedule | Tubes in average or minimum wall; pipes in Sch 10S, 40S, 80S and others per ASME B36.19M / B36.10M |
| Length | Single random, double random and cut lengths |
| Type | Seamless; welded on request |
| Ends | Plain ends, bevelled ends |
| Form / finish | Solution annealed, air cooled, pickled |
| Test certificate | EN 10204 3.1 standard; EN 10204 3.2 with third-party witness on request |
Chemical Composition
| Element | Composition (%) |
|---|---|
| Carbon (C) | 0.030 max |
| Manganese (Mn) | 2.00 max |
| Phosphorus (P) | 0.035 max |
| Sulphur (S) | 0.010 max |
| Silicon (Si) | 0.60 max |
| Nickel (Ni) | 3.5 – 5.2 |
| Chromium (Cr) | 26.0 – 29.0 |
| Molybdenum (Mo) | 1.00 – 2.50 |
| Nitrogen (N) | 0.15 – 0.35 |
Mechanical Properties
| Property | Value |
|---|---|
| Tensile strength | 100 ksi (690 MPa) min |
| Yield strength | 70 ksi (480 MPa) min |
| Elongation in 2 in. (50 mm) | 20% min |
| Hardness | 290 HBW max / 30 HRC max |
| Heat treatment | 990 – 1025 °C, air cool |
Equivalent Grades
| System | Designation |
|---|---|
| UNS | S32950 |
| Trade name | 7-Mo PLUS |
| EN / Werkstoff | No direct equivalent |
| JIS | No direct equivalent |
Testing and Inspection
S32950 pipes and tubes are tested to ASTM A789 or A790 and the general requirements of ASTM A1016 or A999.
- Hydrostatic or electric test: Every length is hydrostatically tested or passed through a non-destructive electric test.
- Flattening and flaring: Flaring for seamless tube and flange or reverse flattening for welded tube, as the standard requires.
- Tensile and hardness: Tensile and Brinell or Rockwell hardness tests on each lot.
- PMI: Positive material identification to confirm chromium, nickel and molybdenum.
- Ferrite and microstructure: Ferrite measurement or microstructure examination when ordered as a supplementary requirement.
- Third-party inspection: Witness inspection by an agency nominated by the buyer.
When ordering, state the product form (tube to A789 or pipe to A790), outside diameter, wall thickness or schedule, length, quantity and any supplementary requirements such as ferrite measurement or ultrasonic testing. Welding of S32950 should follow a qualified procedure with controlled heat input and a matching or over-alloyed duplex filler, so that the weld keeps a balanced ferrite and austenite structure and the corrosion resistance of the parent metal.
Why Choose Riyaarth Overseas
Riyaarth Overseas sources S32950 pipes and tubes from established duplex mills and can arrange cut lengths for exchanger and project orders. Each shipment carries EN 10204 3.1 mill test certificates, and material is packed for export in wooden boxes or bundles with end caps. Share your sizes and quantities for a prompt quotation.
Applications






Frequently asked questions
Is UNS S32950 the same as 2205?
No. 2205 is UNS S31803 or S32205 with about 22% chromium and 3% molybdenum. S32950 has more chromium (26 – 29%) and less molybdenum, so it behaves differently in oxidising and reducing media.
What is 7-Mo PLUS?
7-Mo PLUS is a trade name for duplex stainless steel to UNS S32950.
Can S32950 be used at high temperature?
Like other duplex grades, it can embrittle after long exposure in the range of roughly 300 – 500 °C, so it is normally limited to lower temperature service. Check the allowable temperature in the applicable design code.
Which standard covers S32950 pipe and which covers tube?
ASTM A790 covers pipe and ASTM A789 covers tubing. ASME SA-790 and SA-789 are the code equivalents.
