Request Quote
  1. Home
  2. Products
  3. Super Duplex
  4. UR52N Super Duplex Pipes & Tubes

UR52N Super Duplex Pipes & Tubes

UR52N super duplex pipes and tubes (UNS S32520, EN 1.4507) to ASTM A790 and A789, copper bearing, for seawater and acid service, from Riyaarth Overseas.

UR52N Super Duplex Pipes & Tubes by Riyaarth Overseas

UR52N is the name used in the trade for a copper-bearing super duplex stainless steel from the Uranus family. The current grade, UR 52N+, is now marketed as UR 2507Cu and is specified as UNS S32520 for pipe and tube and EN 1.4507 (X2CrNiMoCuN25-6-3). Older material sold as UR52N, and bar products, may be certified as UNS S32550, a closely related 25% chromium copper-bearing duplex grade. Buyers should confirm the UNS number on the enquiry.

With 24 – 26% chromium, 3 – 5% molybdenum, nitrogen and up to 3% copper, the grade combines super duplex pitting resistance with better resistance to sulphuric and other reducing acids. Pipes are made to ASTM A790 and tubes to ASTM A789. Riyaarth Overseas supplies and exports UR52N super duplex pipes and tubes from mill sources.

Key Features

Copper for acid resistance: Copper of 0.50 – 3.00% improves resistance to sulphuric acid, particularly in the mid-concentration range.

Super duplex pitting resistance: A guaranteed PRE of at least 40 gives good resistance to pitting and crevice corrosion in warm seawater.

High strength: A minimum yield of 550 MPa supports thinner walls and lower weight than austenitic piping.

Stress corrosion cracking resistance: The duplex structure resists chloride stress corrosion cracking and also performs well in sour gas environments.

Specifications

ItemDetails
StandardsASTM A790 / ASME SA-790 (pipes), ASTM A789 / ASME SA-789 (tubes)
GradeUNS S32520 / EN 1.4507 (UR 52N+, UR 2507Cu); UNS S32550 on request
Outside diameterPipes and tubes to the order, subject to mill availability
Wall thickness / schedulePipes per ASME B36.19M / B36.10M schedules; tubes in average or minimum wall
LengthRandom lengths and cut lengths
TypeSeamless; welded on request
EndsPlain ends, bevelled ends
Form / finishSolution annealed at 1080 – 1120 °C, rapidly cooled, pickled
Test certificateEN 10204 3.1 standard; EN 10204 3.2 with third-party witness on request

Chemical Composition

Limits for UNS S32520 to ASTM A790.

ElementComposition (%)
Carbon (C)0.030 max
Manganese (Mn)1.50 max
Phosphorus (P)0.035 max
Sulphur (S)0.020 max
Silicon (Si)0.80 max
Nickel (Ni)5.5 – 8.0
Chromium (Cr)24.0 – 26.0
Molybdenum (Mo)3.0 – 5.0
Nitrogen (N)0.20 – 0.35
Copper (Cu)0.50 – 3.00

Mechanical Properties

PropertyValue
Tensile strength112 ksi (770 MPa) min
Yield strength80 ksi (550 MPa) min
Elongation in 2 in. (50 mm)25% min
Hardness310 HBW max
Density7850 kg/m³ (typical)

Equivalent Grades

SystemDesignation
UNSS32520 (pipe and tube); S32550 (older UR52N and bar)
EN / Werkstoff1.4507 (X2CrNiMoCuN25-6-3)
Trade namesUR 52N+, UR 2507Cu
JISNo direct equivalent

Testing and Inspection

Pipes and tubes are tested to ASTM A790 or A789 and their general requirement specifications.

  • Hydrostatic or electric test: Every length is hydrostatically tested or eddy current tested.
  • Flattening and flaring: Flattening on pipe and flaring on seamless tube.
  • Tensile and hardness: Tests per lot against the S32520 limits.
  • Intermetallic phase check: Detection of detrimental intermetallic phases by ASTM A923 when ordered.
  • Ferrite content and PMI: Ferrite measurement and positive material identification on request.
  • Third-party inspection: Witness inspection and EN 10204 3.2 certification on request.

When ordering, state the UNS number required (S32520 or S32550), the product form, size, wall or schedule, length and quantity, and any supplementary tests such as ASTM A923 or ferrite measurement. Welding should follow a qualified procedure with a super duplex filler metal, controlled heat input and controlled interpass temperature, so that the weld keeps the phase balance and corrosion resistance of the parent pipe.

Why Choose Riyaarth Overseas

Riyaarth Overseas supplies UR52N super duplex pipes and tubes from mill sources and confirms whether S32520 or S32550 certification is required before order. Cut lengths are available, and shipments go with EN 10204 3.1 mill test certificates in export packing. Send your size list for a quotation.

Applications

Offshore oil and gasUsed for process, firewater and seawater piping on platforms.
Seawater systemsUsed for cooling water and desalination piping exposed to warm seawater.
Sulphuric acid handlingUsed where acid concentrations fall in the range that attacks copper-free duplex grades.
Flue gas desulphurisationUsed for scrubber piping handling acidic, chloride-bearing slurries.
Chemical processingUsed for process piping in plants handling strong acids and chlorides.
Pulp and paperUsed in bleach plant and liquor service where high strength and corrosion resistance are both needed.

Frequently asked questions

What UNS number is UR52N?

Current UR 52N+ material for pipe and tube is UNS S32520 (EN 1.4507). Older UR52N and some bar products are certified as UNS S32550. Confirm the required UNS number on your order.

How does UR52N differ from 2507?

Both are super duplex grades. UR52N (S32520) contains copper, which improves resistance to sulphuric and other reducing acids, while 2507 (S32750) is copper-free.

Is UR52N suitable for seawater?

Yes. Its PRE of at least 40 gives good resistance to pitting and crevice corrosion in seawater and other high chloride media.

What is the maximum service temperature?

Super duplex grades embrittle after holding above about 270 °C, so they are normally used below that limit. The design code sets the exact limit.