Request Quote
  1. Home
  2. Products
  3. Carbon Steel
  4. EN 10305-1 E235 Pipes & Tubes

EN 10305-1 E235 Pipes & Tubes

EN 10305-1 E235 (1.0308) seamless cold drawn precision steel tubes in +C, +LC, +SR, +A and +N conditions, stocked and exported by Riyaarth Overseas.

EN 10305-1 E235 Pipes & Tubes by Riyaarth Overseas

EN 10305-1 E235 tubes are seamless cold drawn precision steel tubes made to the European standard EN 10305-1. The standard covers dimensions, tolerances and technical delivery conditions, and replaced the older DIN 2391. Grade E235 (material number 1.0308) is the successor to DIN 2391 St35 and is the most commonly ordered grade under the standard.

E235 is a low carbon steel that is easy to bend, flare and weld, and the cold drawing route gives close tolerances and a clean surface. Buyers can order it in five delivery conditions, from hard drawn (+C) to normalised (+N), to suit machining, forming or hydraulic use. Riyaarth Overseas supplies and exports EN 10305-1 E235 tubes from established precision tube mills, in random or cut lengths, with EN 10204 3.1 certificates.

Key Features

Precision tolerances: Cold drawing gives tight outside diameter, inside diameter and wall tolerances, as set out in EN 10305-1.

Five delivery conditions: +C, +LC, +SR, +A and +N let the buyer choose strength or ductility for the same grade.

Hydraulic grade in +N: Normalised E235 tubes are a usual choice for hydraulic lines with 24° cone fittings, where flaring and bending are needed.

Weldable low carbon steel: Carbon 0.17% max gives good weldability without preheat in normal wall thicknesses.

Specifications

SpecificationDetails
StandardEN 10305-1 (seamless cold drawn tubes for precision applications)
GradeE235 (1.0308)
Outside diameter range4 mm to 260 mm, as per EN 10305-1
Wall thicknessAs per EN 10305-1 dimension tables for each outside diameter
LengthRandom lengths, fixed lengths and cut pieces
TypeSeamless, cold drawn
Delivery condition+C, +LC, +SR, +A, +N
EndsPlain ends, square cut, deburred
Form / finishRound; bright, oiled; phosphated or zinc plated on request
Test certificateEN 10204 3.1; 3.2 with third-party inspection on request

Chemical Composition

ElementComposition (%)
Carbon (C)0.17 max
Silicon (Si)0.35 max
Manganese (Mn)1.20 max
Phosphorus (P)0.025 max
Sulphur (S)0.025 max

Mechanical Properties

PropertyValue
+C (cold finished hard)Tensile 480 MPa min, elongation 6% min
+LC (cold finished soft)Tensile 420 MPa min, elongation 10% min
+SR (cold finished and stress relieved)Tensile 420 MPa min, yield 350 MPa min, elongation 16% min
+A (annealed)Tensile 315 MPa min, elongation 25% min
+N (normalised)Tensile 340 – 480 MPa, yield 235 MPa min, elongation 25% min
Density7.85 g/cm³

Room temperature values from EN 10305-1. For +C, +LC and +A the standard does not set a yield strength.

Equivalent Grades

SystemEquivalent
Material number1.0308
Former DIN standardDIN 2391 St35
Related EN standardsE235 is also a grade in EN 10305-2 (welded cold drawn) and EN 10305-4 (hydraulic and pneumatic tubes)

Testing and Inspection

EN 10305-1 sets the required tests, and the order can add more:

  • Cast analysis: confirmation of C, Si, Mn, P and S.
  • Tensile test: for the ordered delivery condition.
  • Flattening, flaring or drift expanding tests: where agreed.
  • Leak tightness: eddy current test or hydrostatic test as an option.
  • Dimensional inspection: outside diameter, inside diameter or wall, straightness and length.
  • Third-party inspection: with EN 10204 3.2 certificates on request.

Why Choose Riyaarth Overseas

Riyaarth Overseas sources EN 10305-1 E235 tubes from established precision mills and keeps common hydraulic and engineering sizes available. We supply cut lengths, EN 10204 3.1 mill test certificates and export packing with end caps and oiled surfaces. Send your sizes, delivery condition and quantity for a quick quote.

Applications

HydraulicsUsed in +N condition for hydraulic pressure lines and connecting tubes in machinery and mobile equipment.
AutomotiveMade into fuel, brake and power steering lines and machined into sleeves and shafts.
PneumaticsUsed for air lines and pneumatic cylinder barrels.
Machine buildingTurned into bushes, rollers and spacers with little machining allowance.
Furniture and fitness equipmentBent and welded into frames where a clean surface is needed.
Instrumentation and lubricationUsed for small bore lubrication and instrument lines where a clean bore and accurate size matter.

Frequently asked questions

Is EN 10305-1 E235 the same as DIN 2391 St35?

E235 is the EN successor to DIN 2391 St35, with the same material number 1.0308. Delivery conditions map as BK to +C, BKW to +LC, BKS to +SR, GBK to +A and NBK to +N, though some property values differ slightly, so check them against the drawing.

Which condition is used for hydraulic tubes?

The normalised +N condition is normally used for hydraulic lines because it bends and flares well and has a guaranteed yield strength.

Can E235 tubes be supplied zinc plated?

Yes, plated or phosphated finishes can be arranged on request in addition to the standard oiled finish.

What is the difference between EN 10305-1 and EN 10305-4?

EN 10305-1 covers seamless cold drawn precision tubes in general. EN 10305-4 is specific to seamless cold drawn tubes for hydraulic and pneumatic power systems and has extra requirements for those uses.