Request Quote
  1. Home
  2. Products
  3. Carbon Steel
  4. ERW Carbon Steel Pipes

ERW Carbon Steel Pipes

ERW carbon steel pipes to API 5L, ASTM A53 Type E and IS 3589, in black and galvanised finish, for water, oil, gas and structural use, from Riyaarth Overseas.

ERW Carbon Steel Pipes by Riyaarth Overseas

ERW (electric resistance welded) carbon steel pipe is made from hot rolled coil that is slit, formed into a round shell and welded along a straight seam by electric resistance, without filler metal. The weld seam is then normalised or heat treated in line on most modern mills, and the outside weld bead is trimmed. ERW pipe has uniform wall thickness, good roundness and a lower cost than seamless pipe in the same size.

The main specifications for ERW line and process pipe are API 5L (PSL1 and PSL2) and ASTM A53 Type E. In India, IS 3589 covers ERW pipe for water and sewage and IS 1239 covers smaller tubes. Common grades are API 5L Grade B through X70 and ASTM A53 Grade A and Grade B.

Riyaarth Overseas supplies and exports ERW carbon steel pipes in black, varnished, galvanised and coated finishes from established Indian and overseas mills.

Key Features

Uniform wall thickness: Pipe formed from rolled coil has a consistent wall around the circumference and along the length.

Cost advantage: ERW pipe usually costs less than seamless pipe of the same size and grade, with shorter mill lead times.

Heat treated weld seam: In-line seam heat treatment gives the weld zone properties close to the body of the pipe.

Wide grade range: Grades from ASTM A53 Grade A up to API 5L X70 cover water, utility, oil and gas service.

Specifications

ItemDetails
StandardsAPI 5L PSL1 / PSL2, ASTM A53 Type E, ASTM A135, IS 3589, IS 1239
GradesAPI 5L Gr B, X42 – X70; ASTM A53 Gr A, Gr B
Outside diameterSmall bore up to large diameter, according to mill capability
Wall thickness / scheduleSch 10 to Sch 80, STD, XS, or specified wall
LengthSingle random, double random and fixed lengths
TypeElectric resistance welded, straight seam
EndsPlain ends, bevelled ends, threaded and coupled (A53)
Form / finishBlack, varnished, hot dip galvanised, 3LPE / FBE coated on request
Test certificateEN 10204 3.1 standard; EN 10204 3.2 with third-party witness on request

Chemical Composition

Maximum limits for the two most common grades.

ElementASTM A53 Type E Gr BAPI 5L PSL1 Gr B (welded)
Carbon (C)0.300.26
Manganese (Mn)1.201.20
Phosphorus (P)0.050.030
Sulphur (S)0.0450.030
Copper (Cu)0.40…
Nickel (Ni)0.40…
Chromium (Cr)0.40…
Molybdenum (Mo)0.15…
Vanadium (V)0.08…

Mechanical Properties

PropertyASTM A53 Gr BAPI 5L PSL1 Gr B
Tensile strength, min60 ksi (415 MPa)415 MPa
Yield strength, min35 ksi (240 MPa)245 MPa
ElongationPer formula in the standardPer formula in the standard

Equivalent Grades

Approximate equivalents for comparison only. Check limits before substitution.

GradeComparable grades
ASTM A53 Gr B / API 5L Gr BEN 10217-1 P235TR2; IS 3589 Fe 410
API 5L X52ISO 3183 L360

Testing and Inspection

Testing follows the ordered standard. For API 5L and ASTM A53 Type E the weld seam is inspected over its full length.

  • Weld seam NDT: Ultrasonic or electromagnetic inspection of the full weld seam.
  • Hydrostatic test: Hydrostatic test on each length at the pressure set by the standard.
  • Flattening test: Flattening test to check weld ductility.
  • Tensile test: Tensile and yield strength checked per heat and lot.
  • Charpy impact test: Impact test for API 5L PSL2 and when ordered.
  • Third-party inspection: Witness inspection by the buyer or a nominated agency.

Why Choose Riyaarth Overseas

Riyaarth Overseas supplies ERW carbon steel pipes from ready stock and mill production, and can arrange cutting, bevelling, threading, galvanising and coating through partner facilities. Each consignment carries EN 10204 3.1 mill test certificates, and pipes are bundled and marked for export. Send your bill of quantities for a quick quotation.

Applications

Water supply and sewageUsed for water mains, distribution lines and sewage lines, often to IS 3589.
Oil and gas linesUsed for gathering lines, flowlines and city gas distribution to API 5L.
Plant utilitiesUsed for cooling water, compressed air, steam condensate and fire water piping.
Structural workUsed for columns, piling, scaffolding and sheds where hollow sections are needed.
Fire protectionUsed in sprinkler and hydrant systems, usually in A53 or IS 1239 sizes.
Agriculture and irrigationUsed for borewell casing, irrigation mains and pumping lines.

Frequently asked questions

What is the difference between ERW and seamless pipe?

ERW pipe is made from coil and welded along a straight seam, while seamless pipe is pierced from a solid billet. ERW pipe is usually cheaper with more uniform wall, while seamless pipe is preferred for high pressure, high temperature and sour service.

Can ERW pipe be used for oil and gas?

Yes. API 5L allows ERW pipe in PSL1 and PSL2, and it is widely used for line pipe within the size range of ERW mills.

What is ASTM A53 Type E?

Type E is the electric resistance welded pipe type in ASTM A53. Type S is seamless and Type F is furnace butt welded.

Is galvanised ERW pipe available?

Yes. ERW pipes can be supplied hot dip galvanised for water, fire protection and structural use.