
Hastelloy C22 Pipes & Tubes
Hastelloy C22 (UNS N06022) seamless and welded pipes and tubes to ASTM B622, B619 and B626, for oxidising and reducing acids, from Riyaarth Overseas.

Hastelloy C22 is a nickel-chromium-molybdenum-tungsten alloy, UNS N06022 and Werkstoff 2.4602. With about 22 percent chromium, 13 percent molybdenum and 3 percent tungsten, it resists both oxidising and reducing media. It has very high resistance to pitting, crevice corrosion and stress corrosion cracking, and handles wet chlorine, ferric and cupric chlorides, hot contaminated acids and seawater.
C22 pipes and tubes are made to ASTM B622 for seamless product, ASTM B619 for welded pipe and ASTM B626 for welded tube, with matching ASME SB designations. Riyaarth Overseas supplies and exports Hastelloy C22 pipes and tubes to chemical, pharmaceutical, pollution control and energy projects.
C22 is also widely used as a weld overlay and as a filler metal for joining other corrosion resistant alloys, because its chemistry resists dilution effects in the weld. For piping, it is welded by TIG or MIG with matching filler metal and low heat input, and post-weld heat treatment is normally not needed. When enquiring, please state the specification, size, schedule, length and any IGC, PMI or third-party inspection requirements so our offer covers the full scope.
Key Features
Resistance to both oxidising and reducing media: The balance of chromium and molybdenum lets C22 handle mixed acid streams where process conditions swing between oxidising and reducing.
High pitting and crevice corrosion resistance: Chromium, molybdenum and tungsten together give C22 high resistance to localised attack in chloride-bearing solutions.
Weld zone stability: Very low carbon of 0.015 max and controlled silicon limit grain boundary precipitates, so welded structures resist intergranular attack in the as-welded condition.
Wide service range: One alloy can cover several duties in a multi-purpose plant, which simplifies material selection and spare stocks.
Specifications
| Parameter | Details |
|---|---|
| Standards | ASTM B622 / ASME SB622, ASTM B619 / ASME SB619, ASTM B626 / ASME SB626 |
| Grade / UNS | Hastelloy C22, UNS N06022, W.Nr. 2.4602 |
| Outside diameter range | Seamless tube from 6.35 mm (1/4 in) OD; pipe NPS 1/8 in to 8 in seamless, larger sizes welded |
| Wall thickness / schedule | SCH 5S, 10S, 40S, 80S, 160; tube wall in BWG or mm |
| Length | Random and cut lengths |
| Type | Seamless, welded, welded and drawn |
| Ends | Plain ends, bevelled ends, threaded ends on request |
| Form / finish | Round, U-bent, coiled; solution annealed, pickled or bright annealed |
| Test certificate | EN 10204 3.1 mill test certificate as standard; EN 10204 3.2 with third-party inspection on request |
Chemical Composition
| Element | Composition (%) |
|---|---|
| Nickel (Ni) | Balance |
| Chromium (Cr) | 20.0 – 22.5 |
| Molybdenum (Mo) | 12.5 – 14.5 |
| Tungsten (W) | 2.5 – 3.5 |
| Iron (Fe) | 2.0 – 6.0 |
| Cobalt (Co) | 2.5 max |
| Manganese (Mn) | 0.50 max |
| Vanadium (V) | 0.35 max |
| Carbon (C) | 0.015 max |
| Silicon (Si) | 0.08 max |
| Phosphorus (P) | 0.02 max |
| Sulphur (S) | 0.02 max |
Mechanical Properties
| Property | Value |
|---|---|
| Tensile strength (solution annealed) | 100 ksi (690 MPa) min |
| Yield strength, 0.2% offset | 45 ksi (310 MPa) min |
| Elongation in 2 in (50 mm) | 45% min |
| Density | 8.69 g/cm³ |
Minimums are for solution annealed pipe and tube to ASTM B622.
Equivalent Grades
| Standard | Designation |
|---|---|
| UNS | N06022 |
| Werkstoff Nr. | 2.4602 |
| EN / DIN | NiCr21Mo14W |
| Common names | Hastelloy C22, Alloy C-22, Alloy 22 |
Testing and Inspection
Hastelloy C22 pipes and tubes are inspected to the ordered ASTM or ASME specification. Checks normally include:
- Hydrostatic or eddy current test: On every length as required by the standard.
- Flattening and flaring tests: Ductility checks on each lot.
- Positive material identification (PMI): Confirms chromium, molybdenum and tungsten levels.
- Intergranular corrosion test: ASTM G28 testing on request.
- Dimensional and visual inspection: OD, wall thickness, length and finish.
- Third-party inspection: Witness inspection by your nominated agency on request.
Why Choose Riyaarth Overseas
Riyaarth Overseas sources Hastelloy C22 pipes and tubes from recognised nickel alloy producers and supplies them in random or cut lengths to suit your fabrication. Each delivery carries EN 10204 3.1 certificates with traceable heat numbers.
We pack for export in wooden cases and respond quickly with offers against your material lists or data sheets.
Applications






Frequently asked questions
What is the ASTM standard for Hastelloy C22 seamless pipe?
Seamless Hastelloy C22 pipe and tube are made to ASTM B622 / ASME SB622. Welded pipe is ordered to ASTM B619 and welded tube to ASTM B626.
How does Hastelloy C22 compare with C276?
C22 has more chromium and less molybdenum than C276, which gives better resistance in oxidising media and comparable or better pitting resistance. C276 can perform better in some strongly reducing acids.
Can Hastelloy C22 be used in wet chlorine?
Yes. C22 resists wet chlorine gas and hypochlorite solutions, which is one reason it is used in bleach plants and chlor-alkali equipment.
Does C22 pipe need heat treatment after welding?
Normally no. Its very low carbon and silicon keep the heat affected zone resistant to intergranular attack in the as-welded condition for most services.
