Request Quote
  1. Home
  2. Products
  3. Carbon Steel
  4. JIS STKM 11A Carbon Steel Tubes

JIS STKM 11A Carbon Steel Tubes

JIS G 3445 STKM 11A low carbon steel tubes for machine structural use, seamless or welded, supplied and exported by Riyaarth Overseas from Mumbai, India.

JIS STKM 11A Carbon Steel Tubes by Riyaarth Overseas

JIS STKM 11A tubes are carbon steel tubes made to JIS G 3445, the Japanese Industrial Standard for carbon steel tubes for machine structural purposes. STKM 11A is the lowest carbon, lowest strength grade in the standard, with carbon limited to 0.12% maximum. That low carbon content makes it soft and ductile, so it bends, flares, swages and presses easily without cracking.

Buyers specify STKM 11A when a part needs heavy forming rather than high strength, for example tubes that are bent into tight radii or flattened at the ends. The standard allows seamless, electric resistance welded and other manufacturing methods, each marked with a suffix code, so the tube can be matched to the job and budget. Riyaarth Overseas supplies and exports JIS STKM 11A tubes from established mill sources with mill test certificates and cut lengths on request.

Key Features

Very low carbon: Carbon 0.12% max and manganese 0.60% max keep the steel soft, which suits deep forming, tight bends and end flattening.

High elongation: A minimum elongation of 35% (longitudinal test piece) gives a wide margin before cracking during cold work.

Several manufacturing routes: JIS G 3445 covers hot finished seamless, cold finished seamless, electric resistance welded and other routes, marked with codes such as -S-H, -S-C and -E-G.

Easy to weld and braze: The low carbon content allows welding and brazing without preheat in normal wall thicknesses.

Specifications

SpecificationDetails
StandardJIS G 3445 (carbon steel tubes for machine structural purposes)
GradeSTKM 11A
Outside diameter rangeAs per enquiry; dimensional tolerances to JIS G 3445
Wall thicknessAs per enquiry; tolerances to JIS G 3445
LengthRandom lengths, fixed lengths and cut pieces
TypeSeamless (hot or cold finished) or electric resistance welded (as welded or cold finished)
EndsPlain ends, square cut, deburred
Form / finishRound; black, bright or oiled finish depending on route
Test certificateEN 10204 3.1; 3.2 with third-party inspection on request

Chemical Composition

ElementComposition (%)
Carbon (C)0.12 max
Silicon (Si)0.35 max
Manganese (Mn)0.60 max
Phosphorus (P)0.040 max
Sulphur (S)0.040 max

Mechanical Properties

PropertyValue
Tensile strength290 MPa min
Yield strengthNot specified
Elongation (longitudinal)35% min
Density7.85 g/cm³

Elongation applies to the longitudinal test piece listed in JIS G 3445; the value for transverse test pieces is lower.

Equivalent Grades

There is no exact foreign equivalent for STKM 11A. In chemistry and strength it sits close to low carbon cold forming tube grades, but JIS, EN and ASTM limits differ, so substitution should be checked against the drawing and approved by the designer.

Testing and Inspection

Tubes are tested to JIS G 3445 and the order requirements:

  • Chemical analysis: heat analysis for C, Si, Mn, P and S.
  • Tensile test: tensile strength and elongation.
  • Flattening test: to confirm ductility, and for welded tubes, weld soundness.
  • Bend test: where specified for the size.
  • Non-destructive testing: eddy current or ultrasonic testing of welded tubes when ordered.
  • Dimensional and visual inspection: diameter, wall, length and surface.
  • Third-party inspection: on request.

Why Choose Riyaarth Overseas

Riyaarth Overseas sources STKM 11A tubes from established mills and can supply them in fixed or cut lengths to suit your production line. Each shipment carries a mill test certificate to EN 10204 3.1, and export orders are packed in bundles with end protection. Share your sizes, quantity and manufacturing route for a quick quote.

Applications

AutomotiveUsed for bent tubes, brackets and lightly loaded pipework in vehicles where forming matters more than strength.
Two-wheeler partsFormed into handle bars, carriers and guards that need tight bends and flattened ends.
FurnitureBent into chair and table frames and then welded or brazed.
Bicycle and fitness equipmentUsed for frames and accessory tubes that are swaged, bent and joined.
Electrical and appliance partsFormed into supports, guides and conduits in household and industrial appliances.
General fabricationUsed for light structural members, guards and racks made by bending and welding.

Frequently asked questions

What does STKM stand for?

STKM is the JIS symbol for carbon steel tubes for machine structural purposes under JIS G 3445. The number and letter after it, such as 11A, identify the grade.

What is the difference between STKM 11A and STKM 13A?

STKM 11A has lower carbon (0.12% max) and lower tensile strength (290 MPa min) but higher elongation. STKM 13A has up to 0.25% carbon and 370 MPa minimum tensile strength, so it is stronger but less formable.

Is STKM 11A seamless or welded?

It can be either. JIS G 3445 allows several manufacturing routes, and the route is shown by a suffix in the marking, such as -S-C for cold finished seamless or -E-G for as-welded ERW.

Is STKM 11A suitable for pressure service?

JIS G 3445 is a structural tube standard and does not cover pressure piping. For pressure service, tubes to a pressure standard such as JIS G 3454 or G 3461 should be used.