
LSAW Carbon Steel Pipes
LSAW carbon steel pipes to API 5L PSL1 and PSL2, grades B to X70, for oil, gas and water pipelines and piling, supplied and exported by Riyaarth Overseas.

LSAW (longitudinal submerged arc welded) carbon steel pipe is made from steel plate that is formed into a cylinder and welded along a single straight seam by the submerged arc process, from both inside and outside. Forming is commonly done by the JCOE or UOE method, and most pipes are mechanically expanded after welding to correct roundness and relieve stress.
Because it is made from heavy plate, LSAW covers large diameters and thick walls that ERW and seamless mills cannot produce. It is the usual choice for high pressure trunk pipelines, offshore lines and heavy structural piles. The main specification is API 5L (PSL1 and PSL2), with ASTM A671 and A672 for pressure service and ASTM A252 for piling.
Riyaarth Overseas supplies and exports LSAW carbon steel pipes from established plate-to-pipe mills, with coating and end preparation to project specification.
Key Features
Large diameter, heavy wall: Plate forming allows large outside diameters and wall thicknesses beyond the range of ERW and seamless mills.
Double-sided weld: Submerged arc welding from inside and outside gives full penetration of the seam.
High strength grades: Grades up to X70 and higher allow thinner walls for high pressure pipelines.
Mechanical expansion: Cold expansion after welding improves roundness and dimensional consistency for field welding.
Specifications
| Item | Details |
|---|---|
| Standards | API 5L PSL1 / PSL2, ASTM A671, ASTM A672, ASTM A252, EN 10219 |
| Grades | API 5L Gr B, X42, X46, X52, X56, X60, X65, X70 |
| Outside diameter | Large diameters according to mill capability |
| Wall thickness | Heavy wall sizes according to mill capability and grade |
| Length | Single random and double random lengths |
| Type | Longitudinal submerged arc welded (JCOE / UOE) |
| Ends | Bevelled ends to API 5L, plain ends for piling |
| Form / finish | Bare, varnished, 3LPE, 3LPP, FBE, coal tar or concrete weight coating on request |
| Test certificate | EN 10204 3.1 standard; EN 10204 3.2 with third-party witness on request |
Chemical Composition
Maximum limits for welded PSL2 pipe in two common grades.
| Element | API 5L PSL2 X52M | API 5L PSL2 X65M |
|---|---|---|
| Carbon (C) | 0.22 | 0.12 |
| Silicon (Si) | 0.45 | 0.45 |
| Manganese (Mn) | 1.40 | 1.60 |
| Phosphorus (P) | 0.025 | 0.025 |
| Sulphur (S) | 0.015 | 0.015 |
Mechanical Properties
API 5L PSL2 requirements for pipe body.
| Grade | Yield strength (MPa) | Tensile strength (MPa) |
|---|---|---|
| BM | 245 – 450 | 415 – 655 |
| X52M | 360 – 530 | 460 – 760 |
| X65M | 450 – 600 | 535 – 760 |
| X70M | 485 – 635 | 570 – 760 |
Equivalent Grades
| API 5L grade | ISO 3183 / EN ISO 3183 grade |
|---|---|
| Grade B | L245 |
| X52 | L360 |
| X65 | L450 |
| X70 | L485 |
Testing and Inspection
Testing follows API 5L or the ordered standard. PSL2 pipe has stricter chemistry, impact and NDT requirements than PSL1.
- Weld seam NDT: Automatic ultrasonic testing of the full weld seam and radiography of pipe ends.
- Hydrostatic test: Hydrostatic test on each length.
- Tensile and guided bend tests: Body and weld tensile tests and guided bend tests on the weld.
- Charpy impact test: Impact tests on body and weld for PSL2 pipe.
- DWTT: Drop weight tear test for larger PSL2 gas pipe where required.
- Third-party inspection: Witness inspection by the buyer or a nominated agency.
When ordering LSAW pipe, state the standard and PSL, grade, outside diameter, wall thickness, length, end finish, coating and any project specification that adds requirements beyond API 5L, such as sour service testing or tighter chemistry. For sour service, API 5L Annex H sets additional limits and hydrogen induced cracking tests. Large orders are usually produced to a mill schedule, so share the delivery plan early so that plate supply and production slots can be arranged.
Why Choose Riyaarth Overseas
Riyaarth Overseas supplies LSAW carbon steel pipes through established large diameter pipe mills and coordinates coating, end preparation and third-party inspection to the project specification. Every shipment carries EN 10204 3.1 mill test certificates, and pipes are loaded with suitable protection for export. Send your line list for a quotation.
Applications






Frequently asked questions
What is the difference between LSAW and SSAW pipe?
LSAW pipe has one straight longitudinal seam and is made from plate. SSAW pipe has a spiral seam and is made from coil. LSAW is generally preferred for high pressure and offshore lines.
What is the difference between JCOE and UOE?
Both are LSAW forming methods. JCOE forms the plate step by step in a press, while UOE presses it into a U shape and then an O shape. Both are expanded after welding.
What is the difference between PSL1 and PSL2?
PSL2 has tighter chemistry, a maximum as well as minimum yield strength, mandatory impact tests and stricter NDT. It is used for more demanding pipelines.
Can LSAW pipes be supplied coated?
Yes. Coatings such as 3LPE, 3LPP, FBE and concrete weight coating can be arranged with the order.
